Picture Thread

[Andrew]

Post pictures of your custom guns!

[Creek]

C:\My Documents\My Pictures\blazer.JPG

I'll get a better pic in a few days dam camera mess me up

[Richy_C]

one sweet blazer

[MacGyver]

here is my custom pgp

[Creek]

People this is a picture thread. As far as custom goes if you can buy it over the counter as a kit, it isn't really custom. But I am trying to give a little lead way here. If you want to make comments of what or who post pics', make a new thread. Comments on the markers pics' can be made here.

[Letchworth40]

My Totally Custom Cocker. NOT ANNOD YET. what color should i anno it?

[Viper1357]

Here is what would have been used in the movie PREDATOR if they were using paintball guns.:crazy:

Actually it's my PEC MASTER with some military mods and a Tippmann Ordnance M203 grenade/shotgun load launcher... And yes, it is quite heavy.

[Viper1357]

I was not happy with the look of the barrel looking soo much shorter than the Grenade Launcher even with the mock flash hider, So I just added a new longer one. It is similar to an M4A2? barrel extender/muzzle brake/flash hider, or whatever. :)

In anycase it gives me the look I want, and it looks kinda cool, at least I think. :crazy:

[toocool_guy]

Here' smy baby. THis gun was built from scratch.
Bob Long Body, Big Shot barrel, AKA lightning bolt and rear cocking setup, 32 degrees valve and pin, brass cup seal, 32 degrees springs, Taso LP chamber and vertical ASA adapter, Taso velocity adjuster, .45 Benchmark trigger frame and internals, both Male and Female Palmer stabllizers, quick disconnect on a steel braided hose, dye microguage, and custom side slot cover.

[toocool_guy]

Hers's the other side.

[toocool_guy]

Hers' the other side.

[Viper1357]

I'm back with a newly modified PEC MASTER sporting an extremely accurate 14" custom ported PEC barrel, a custom machined aluminum black powder coated 10" ventilated forgrip handguard, and an authentic M16/AR15 multi-position collapsible rear stock. I have also mounted a Bushnell 4x scope. This gun is unbelievably accurate, and when sighted in to the proper eye relief would be quite formidable to play against while in the hands of a seasoned sniper.

[Viper1357]

Here's another look from the business end of it.

[drake9]

heres a pic of my custom shocker with...
*angel trigger frame
*front mount max flow
much more
"read sig."

[Viper1357]

Ok, you have all seen my super gargantuan Schwartzenegger, too long, too heavy, monster gun with grenade launcher...
Well, now that winter is supposedly on it's way, and we have only a few selected winter outdoor games here, (MN) I have decided to try and play indoors. I decided to modify a PEC MASTER (surprise) to a smaller gun size, as my friends said my long guns would be a bigger target than me... I couldn't decide on which of 2 mods I liked better so I made both of them. I Have a choice of vert or horiz tank config and will be using 4oz. tanks and 140 rd hoppers. I plan to try and use both at the same time ala Lara Croft.. I know you guys are laughing, but it may just work out...
Here is my left handed gun it is a 6" bbl ported...

[Viper1357]

Here is the right handed one. It is slightly heavier with a 7-1/4" bbl with a oversized 2"long ported muzzle brake. If I choose to use just one, this would be the one I'd use.

[Creek]

My blazersC:\My Documents\My Pictures\blazers.jpg

[snipinhick]

this is my primary marker now that the phantom is sold (don't worry friends, there is another one in the near future)

[EMSTER]

another look

[JERSEYDEVIL]

3e custom

[JERSEYDEVIL]

:love:

[Egrape88]

this would be cool if it was real

[tigershark16]

Thats my Tigershark, with that barrel extension it is accurate, email me or go to my website for plans.:pissed:

[burler]

http://www.paintballbonanza.com/Gearstore/Gearpics/Mvc-009f.jpg
http://www.paintballbonanza.com/Gearstore/Gearpics/Mvc-010f.jpg

[WARPED1]

not mine,but a joke cocker from doc up in alaska

[shortlived]

Heres mine: (not shown, tippmann raised sight, and bottom line)

[shortlived]

heres more pics of my gun

[ME262]

some of mine, first the monster 3.0

[ME262]

other side

[ME262]

some ano

[ME262]

a shocker i anoed

[ME262]

old pic of monster v.1 1/2 monster with electro conversion, bulky but worked

[EMSTER]

new Equation MS Pro Barrel

[EMSTER]

shorty barrel

[kingtime69]

:confused:
does a custom paint job count? oh well here is mine
:peace:

[EvilPopTart]

Its not quite a marker but it is custom! I built it myself.

[EvilPopTart]

Heres another shot

[Viper1357]

Here is my latest project... :crazy: I know, some will love it some will hate it, but I just kinda have fun trying to make them. This is the original M16 A1 Vietnam style. once again I am using a PEC MASTER as the base gun. I custom threaded 2 barrels together to make it a full 22" barrel. :eek:

Before all you physics majors come out of the woodwork explaining the do's and dont's of that length, remember it's just for fun, and I didn't make this any thing but that. :cool:

It is only partially done as I still need to add a different carry handle rear sight I am still modifiying. a sling, and some other nip's and tucks.

[Viper1357]

Nope... As a matter of fact I've probably decreased it a bit. Adding longer barrels, more weight (due to cosmetic mods), changes some of the physics of a paintball gun. I've had to up the velocity on the really long barrels to get the paint out, and the bigger guns are tough to move fast with.
I usually play with the shorter mod ones, 12" to 16" barrels.

Now in defense of "Performance Improvments" and my mods, the PEC MASTER never really needed any "Improved Performance" to begin with. The stock 12" ported barrels have been about the most accurate I've ever shot. Especially out of the box. They will practically shoot liquid Co2 so reliability has also been exceptional. I cannot think of any performance improvement needed for milsim or woodsball (games I play) that would help me any more. The ported extensions I've made seem to help stabilize each shot, and the butt stock helps steady my aim. I use the sights on the guns, and hit what I aim at, usually. ;)

Here is one with a 14" barrel and a 7" ported extension. The extension is 4" down the (top) of the barrel so the ball exits right behind the ports in the extension. It may offer a marginal improvement, but I made it mostly for looks.

[Viper1357]

I think when people see these "out of the ordinary" type markers/guns it always stirs some sort of emotion whether it is positive or negative, critical, or even some competetiveness at times. But I appreciate your comments. I just get a kick out of thinking up some new project like these and then finding a way to see them through... Just my style I guess.

Which reminds me.. I'm getting closer to completing my Vietnam styled M16 marker. Check out the modified rear sight carry handle and sling. Trying to get all of these parts to fit together with tight tolerances, look good, and be assembled to actually be used, be reliable and take playing abuse is more time consuming and difficult (and frigging expensive) than one would think... I'll get bored some day, but for now :crazy:

[vwtrucker1]

THESE ARENT MINE IN CASE THE MAKERS LOOK AT THIS:

[vwtrucker1]

Heres another:

[vwtrucker1]

And Another

[Dr. Isotope]

My nearly fully-custom Palmer Hurricane, complete with flame ink-job (yes, that's ink) on the hardwood (walnut/cherry sandwich) stock; trigger frame is solid cherry, grips are burled walnut. Solid delrin bolt (no o-rings!), solid delrin valve, custom velocity adjuster body with shortened trigger.

[Dr. Isotope]

more flames!!! more!!!

[bigbrun12]

not mine but realy sweet

http://www.geocities.com/Colosseum/Field/4608/m1carbine.html

[Viper1357]

Well, this may not be as cool as the old WWll stuff, but it is mine.:)

I am finally done with all of the mods I've been doing to the MASTER guns I have. This is the last of them... It's a more modern military mod...:crazy:

[AlienAntFarm]

ok you are both wrong its a M1 Carbine its like a shorten down version of the grand.

[AlienAntFarm]

ok heres another one

[psychosmiley]

fully modded sniper talon

[psychosmiley]

my friends fully modded assult talon

[Mr. Gotcha]

This page has tons of custom paintball guns.
http://www.rustyspaintballgear.com/

[Skurge_112]

here ya go

[Skurge_112]

and another

[roninshaggy17]

MR Deepcover,
The pic of the gun you posted is a Super Stalker otherwise known as The Box Gun. Derived from the Desert Duck. But not the same gun. A nice little stock gun. The Desert Duck is a much more pricey marker though. Still a nice piece. If you ever want to sell it I would be interested.
Shaggy17

This is a pick of the Desert Duck...:)

[roninshaggy17]

Just a quick pic of my Cocker.
Nice page pbreview!

[leedthefirst]

Talon!

[leedthefirst]

Semi Auto Talon:

[G! "]["y|3R]

heres a palmers purstui shop nasty typhoon

[FactsOfLife]

PPS Typhoon...

[WILDcard]

oh man check this one out. Its not mine but its kinda funny to look at this may already be posted but thats alot of messages.

http://www.geocities.com/barbiekey/paintball/f-superangel.jpg

[WILDcard]

here try this one there was a - mark between the url.

http://www.geocities.com/wildcardnlm/paintball/superangel.jpg

[Viper1357]

I got bored again and decided to use up some spare parts I had lying around from other projects to change the look of my A-5...:)

The mount under the laser is actually black, but for some reason the camera flash turned it a brownish color.

[Viper1357]

Muzzle end..

[Intelliphreak]

My latest custom job. I like to call it:
Intelli's Silver\Gold\Green Custom "Z" Grip Pump-Action 68. Paintball Marker

Here are some pics.

[Intelliphreak]

Just missing one thing, the trigger:( I will post more pics when finished :)

[Ducks]

Here is something a bot different, its the one and only Havok

http://www.ezshots.com/album.cgi?kenelt/display/kenelt-1

[Thor the Mighty]

well, not really a custom marker but hey, it can be put on a marker!

THE GHETTO Z-GRIP AND ULTRA GHETTO MAG!!!!! brought to you by pbr :D

www.geocities.com/heath3604/ghettoupgrades

[EvilPopTart]

Pump Piranha (http://forums.paintballcity.com/showthread.php?s=&threadid=260682)

yes it works. For some reason, it works better than it did as a semi.

Please look at the PBC link. It has all the pictures

[cruble]

This is my milly m 16

[cruble]

This is my custom sonix "home dremil job" This is what happens when you pick up a worthless marker real cheep, and then get bored with life.

[cruble]

This is my baby, BL Millennium w/ Sonic Conversion Kit & LPR mod.

[IllRollinVa]

my gun

[IllRollinVa]

another pic

[OneArmedBandit]

heres a pic of my main marker that i use. its not the best picture.

:P The One Armend Bandit :P

[OneArmedBandit]

heres a pic of my my back up marker that i use. its not the best picture also but the only one that i have.

:P The One Armend Bandit :P

[rwillia]

Centerfeed PGP Stroker w/drop and female Stab:

[mutany15]

Sorry about the quality, the camera is really a digital video camera, but you can take digital pics with it also.


http://members.lycos.co.uk/mutanyshouse/images/nickspimpxtra.JPG

[E-Force-Master]

yes/no
this is custom because its the way i want it, but it isnt because its mainly parts you can buy....other than the custom stickers and the new board and anti-chop-eye..........n e ways....enjoy

and i tried to post this earlier but it started something new so anyways i think i got it this time.

[jrose152]

not really custom juwst a custom silencer

[xtpwhitetrashx]

My B-5

[cruble]

Ruble Customs AMG

[NXD5150]

heres my set up

[haupia]

:D

[Digger]

And my Palmer Blazer ...


http://dig.anthro.niu.edu/paintball/tnbz864f.jpg
(http://dig.anthro.niu.edu/paintball/bz864f.jpg)Click on the photo for a larger image.

[moocow90]

here is my pt extreme it has a warpfeed a reverse 9oz and macroline

[breakout3]

tl+

[Tjc1088]

heres my custom tippmann

[komoto]

.

[SwEeTiMpY47]

Theres my gun.damn

[pb_aznstyle]

http://www.docsmachine.com/

NOT MY STUFF but DAMN he's good.:drop:

[The Kampfer]

Nasty Typhoon (Kampfer)
http://www.pbase.com/image/23877301/medium.jpg

Convertible Typhoon with Pump Kit (Perfect Storm)
http://www.pbase.com/image/25044744/medium.jpg
http://www.pbase.com/image/25044705/medium.jpg

[The Kampfer]

Palmerized PGP (Spear Head)
http://www.pbase.com/image/25044805/medium.jpg

Palmerized PGP (Javelin)
http://www.pbase.com/image/25164412/medium.jpg

PPS Pursuit Pistol Stroker(Previously Ownned)
http://www.pbase.com/image/23882937/medium.jpg

[komoto]

Custom sniper rifle.

(the barrel is coming in mail, i used 2 in this pic to simulate the 21 inch barrel coming in the mail.)

[TrashDoG]

Here's my WG-65 Elite w/ B-Extension, It'll look better later but I'm waiting for a few new things to come out for it (rifled barrel, new trigger frame, and im making the b-extension do what it's "supposed" to do, hehe)

[fartface]

Here is my VM68

[fartface]

Here is another view

[cruble]

one

[Viper1357]

Here's my new mod.. Kind of a break away from my traditional M4/M16 style.. Mag well and mag are metal, as well as the extension.. The buttstock is off a real MP5.. I bought it off ebay from a guy in Germany...

http://img29.photobucket.com/albums/v88/viper1357/A-5%20%20MP5/1a5_mp5_608.jpg

http://img29.photobucket.com/albums/v88/viper1357/A-5%20%20MP5/3a5_mp5_611.jpg

[Viper1357]

Although from a distance Armotechs look similar to an M16/M4, that's where it ends.... Grip is wrong, carry handle plastic?? Muzzle break is odd looking, no magazine or mag well. I am surprised with your discerning eye, you didn't spot those things......

I'll take these any day.. Real (metal) firearm parts modified to fit.

http://img29.photobucket.com/albums/v88/viper1357/Paintball/gearbag10wc.jpg


Plus here are some other pics of my imperfect work...

http://vipercrazypbmods.mypicgallery.com/

http://a5magazine.mypicgallery.com/

Armotech??? Nothing wrong with them, but with the "imperfections" I really would rather have my stuff..

Mark

[Viper1357]

Thanks, That's the nicest thing you've said to me...

In case we ever meet in a night game... I'd like you to "say hello to my lil friend"
(I'd have a mask on of course)


http://img29.photobucket.com/albums/v88/viper1357/Paintball/vprcamo357.jpg

Viper

[The Kampfer]

Nice work as always, Viper. A+ :up:
About Armotech....Hehe, not my thing.
I perfer MP-5 over M16/M4 anyday anytime.


Here is my new gun, coming soon.
http://www.pbase.com/image/26621615.jpg

[TrashDoG]

Originally posted by The Kampfer
Nice work as always, Viper. A+ :up:
About Armotech....Hehe, not my thing.
I perfer MP-5 over M16/M4 anyday anytime.


Here is my new gun, coming soon.
http://www.pbase.com/image/26621615.jpg


Dude u dont know much about Armotech then do you?

The WG-75 (Mp5 version) was out for a while then discontinued due to a trigger problem.

It is being released again probably in April, way better than before. Looks ALOT like the Mp5, and you can fit TONS of airsoft or real mods on it with a bit of modifications to it, it looks insane too.

[The Kampfer]

Kämpfer's Scimitar
http://www.pbase.com/image/29693879/medium.jpghttp://www.pbase.com/image/29693944/medium.jpg
http://www.pbase.com/image/29729168/medium.jpghttp://www.pbase.com/image/29729165/medium.jpg


Check http://www.pbase.com/the_kampfer/scimitar for full size pictures.

[The Kampfer]

http://www.pbase.com/image/31681317/large.jpg
http://www.pbase.com/image/31681325/large.jpg

[Spyd3rFr3ak]

My Spyder Aggressor XT. This may not belong here, but I consider it custom.

http://img.photobucket.com/albums/v444/TheJohn/MyGun5.jpg

P.S.-Nice gun(s), Kampfer.

[Robotech]

My Ariakon SIM-5 with a few Airsoft additions:

http://forum.ariakon.com/uploads/Robotech/Z83_SIM5_mod21.jpg

The extra mag in the picture was a prototype peice for the magazine modification hence why it looks all jacked up.

[orpheo]

:D

Say hello to my little friend...

Vm-68 bought for 30 bucks , its 10 years old and was used as a rental gun... considering these facts the gun remains considerably accurate at 20 - 25 mts. (the magic of cleaning and oiling) , the pieces were milled out of aluminium , the fake gas piston is actually an expansion chamber , the barrel is armson , the stock was a gift , so was the ammunition box attached to the lower side of the gun...

It is however not yet completed... only about 65% some other pieces have not yet been mounted... a new PKM style stock will be built for it later.

This gun is supposed to function in a role of Squad Automatic Weapon.:)

[bambam123]

heres somthin pretty cool not really custom it one of those double barreled shotgun thingies

[fiendknight]

Here is my Spyder Xtra. Cool isn't it?

[WY_Guy]

Here's an old side-cocking Kingman Spyder Classic with an actual H&K 91/G3 Thumbhole stock, 16" CMI Tru-Flight Barrel, 32 Degrees Vertical ASA, Simmons 3x9x50 Rifle Scope, and 47mm Walther Red Dot. This thing is fun to play with and really intimidates newbies in the woods.

Mainly done just for fun. Making an actual assault rifle stock fit a paintball marker wasn't that difficult. This thing really irritates speedballers, which is part of the fun.

http://i35.photobucket.com/albums/d192/laramiepaintball/Sniper.jpg

http://i35.photobucket.com/albums/d192/laramiepaintball/Sniper2.jpg

[Vraptor]

ok well heres my first gun i ever modded and painted. im proud of it :)

http://i7.photobucket.com/albums/y289/Rednekboi/Picture025.jpg
sorry about the image blurryness, stupid Quickcam


does this count as a custom gun?

[Esp_Spyder]

Heres my custom rodeo. I have a different body on it right now.

http://photobucket.com/albums/f255/Esp_spyder/?action=view&current=untitled2.jpg

[Unimoose]

none u guys play speedball.. and stuff but what u guys r doing is runin the sprt of paintball..

Actually I play speedball w/ this... if your ever in Oregon feel free to look up Punisher's Customs and tell him your opinion of his work...
http://i3.photobucket.com/albums/y93/unimoose1/100_0475a.jpg
Here's my other toy...
http://i3.photobucket.com/albums/y93/unimoose1/100_0225.jpg

And my own work, E-bolted 98C w/ a number of special items...
http://i3.photobucket.com/albums/y93/unimoose1/100_0390.jpg

[AbesCorpeus]

This is a spyder compact modded in to a 11rnd capacity Pistol I call it a GATT MKII. Tell me what you guys think.
http://s69.photobucket.com/albums/i66/Scorch_74/?action=view&current=GATT_MKII.jpg

[nocpan]

Here is my work in progress, its an old Mokal company Mirage semi-auto, I disgraded the bottom asa and attached a 12grm adapter using a duck bill which i fit onto the trigger frame (it came little crooked), connected the co2 suppy to the marker with a micro (yes micro no macro) line. Barrel is Taso 12 in from I&I (i hate that store) ported but needs a lot of work since its scratched to hell on the inside (bad finish job). I will be building a wooden grip over the adapter and the barrel to cover it and have good hold on the marker.

Inside the valve and the hammer have lighter springs since i played with a ION reg on this marker (and it did shoot at 200 psi).

I'm slowly stripping the black iodizing (which they applied very well) and will polish the whole marker to a mirror finish.

http://www.nocpan.com/1image/pb_mirage_hand1.jpg
http://www.nocpan.com/1image/pb_mirage_hand2.jpg

[mookhaasa]

my "Timmy"-ish gun

[ShockerGEEk]

Here is my Quest......fresh from anno. CP 2 piece and Check-it unimount.
http://s13.photobucket.com/albums/a270/shockergeek/th_100_1257.jpg

Not sure if this post the pic right or not......I'm posting from my cell.

Here is some better pics.

http://i13.photobucket.com/albums/a270/shockergeek/th_100_1257.jpg (http://i13.photobucket.com/albums/a270/shockergeek/100_1257.jpg)
http://i13.photobucket.com/albums/a270/shockergeek/th_100_1256.jpg (http://i13.photobucket.com/albums/a270/shockergeek/100_1256.jpg)
http://i13.photobucket.com/albums/a270/shockergeek/th_100_1255.jpg (http://i13.photobucket.com/albums/a270/shockergeek/100_1255.jpg)
http://i13.photobucket.com/albums/a270/shockergeek/th_100_1254.jpg (http://i13.photobucket.com/albums/a270/shockergeek/100_1254.jpg)
http://i13.photobucket.com/albums/a270/shockergeek/th_100_1253.jpg (http://i13.photobucket.com/albums/a270/shockergeek/100_1253.jpg)
http://i13.photobucket.com/albums/a270/shockergeek/th_100_1252.jpg (http://i13.photobucket.com/albums/a270/shockergeek/100_1252.jpg)
http://i13.photobucket.com/albums/a270/shockergeek/th_100_1251.jpg (http://i13.photobucket.com/albums/a270/shockergeek/100_1251.jpg)

[bl_leurck]

Custom milled and ano'ed
E1 w/ Zero B. 1.10
Samurai Trigger
AKA internals
AKA Bolt
A+ Twisting feedneck
Twisted Volumizer
Shocktech Ram
Palmer LPR
AIM 68 Reg.
Evil ON/OFF
12" J&J Ceramics Barrel

http://i1.tinypic.com/x5o9qx.jpg
http://i3.tinypic.com/x5oapv.jpg

[the_godly_newb]

http://i86.photobucket.com/albums/k90/the_godly_newb/paintballmarkers001.jpg

not rly much custom about it ecept the fact that it has a mr1/mr2 stock on the back.

oops underwear in pic ingnore that.

[GM Custom]

Here's 1 of 3 spyder compact & targa I mod with some old airsoft parts
this is just a ruff proto and I'm still looking for real styer aug clip for it.
I will post pics of the p90 & mp5 sd6 soon .:D

[413sonix]

Sick, just plain sick. No they're not my guns.

http://i34.photobucket.com/albums/d127/CRF100biker/23517433815.png

http://i34.photobucket.com/albums/d127/CRF100biker/Auroracocker2.jpg

http://i34.photobucket.com/albums/d127/CRF100biker/aurora.jpg

http://i34.photobucket.com/albums/d127/CRF100biker/AURORAEclipseBM2K01387.jpg

[ded_n_buried]

Not really all that custom...
BUT.......Here it is.......
http://i5.tinypic.com/2j4ty75.jpg

[wulf1010]

Well, this is my newest...Custom? o_O...not realy sure if i should call it that actually. Its just a system x bas with some chops. It has been shortened 1" off the rear of the gun, I've cut way the top tube till about 3/4" from the air port, the fronts been cut down to nearly the valve air chamber. The coolest thing is the backs been trimmed down till you can see into the bottom tube of the gun, i get a kick watching the hammer go back and forth lol.

it was a home project, done with house hold tools, hack saw, dremel, sand paper, and files. Only power tools were a chop saw and table top sander. Thus its a bit rough, and befitting a super low budget, spare parts job it got a rattle can out fit.

http://img137.imageshack.us/img137/8647/p3270015qw4.th.jpg (http://img137.imageshack.us/my.php?image=p3270015qw4.jpg)

http://img86.imageshack.us/img86/2223/p3270016su5.th.jpg (http://img86.imageshack.us/my.php?image=p3270016su5.jpg)

http://img86.imageshack.us/img86/1605/p3270017ul6.th.jpg (http://img86.imageshack.us/my.php?image=p3270017ul6.jpg)

[sniperx52]

ok. my paintball grenade launcher
http://i194.photobucket.com/albums/z172/sniperx52/DSC00015.jpg
http://i194.photobucket.com/albums/z172/sniperx52/DSC00014.jpg
http://i194.photobucket.com/albums/z172/sniperx52/DSC00013.jpg
http://i194.photobucket.com/albums/z172/sniperx52/DSC00016.jpg
wit ma gats
http://i194.photobucket.com/albums/z172/sniperx52/DSC00047.jpg
pimp eh?

[Vern1]

Greetings,
A real custom to wake things up a little in the land of bolt-ons, the NadaCocker:
http://www.pettypb.com/nbc1/nac1.jpg
http://www.pettypb.com/nbc1/nac2.jpg
http://www.pettypb.com/nbc1/nac3.jpg
http://www.pettypb.com/nbc1/nac4.jpg
http://www.pettypb.com/nbc1/nac5.jpg
http://www.pettypb.com/nbc1/nac6.jpg
Yes, it works....yes, it IS fast....NO, you can't have it, I BUILT IT AND IT'S MINE!!!!!
NadAgain (NadaCocker II) is undergoing testing now....my son shot lots of fools with it last weekend.....

Edit: the Palmer stuff is uber-cool.....and CUSTOM!!!!

[joskripin]

my Impulse on Dye DM4 Frame.
-Evil valve/LPR.WAS
-Rat Hammer.CCM.NDZ. etc..etc freak!

http://i123.photobucket.com/albums/o302/jossdg/fadfafdd-1.jpg

[going_home]

The last of these bodies were made in 2000 by Pro Team Products.
PTP saved the last 10 to do a special edition marker.
In the meantime they were in a box that got lost in moving from one building to another. The box was found early 2007 and I bought the body and foregrip.
The gas thru and barrel were sent to Rainman on MCB to make them dust black.
And the foregrip needed to be tapped on the other side so I could use my reverse Xvalve with ULT. Got a Redz feedneck and asa/rail and it was complete.
One of a kind.

http://i19.photobucket.com/albums/b195/going_home/DSC_0002-7.jpg

http://i19.photobucket.com/albums/b195/going_home/DSC_0001-9.jpg

I will be adding more later.

:D

[AmaproPaintball]

Guess they don't allow html here, so follow the links

http://amapro-paintball.angelfire.com/photos/guns_031.jpg
http://amapro-paintball.angelfire.com/photos/guns_028.jpg

[Macdev_Militia6]

http://img37.imageshack.us/img37/4169/1000377y.th.jpg (http://img37.imageshack.us/my.php?image=1000377y.jpg)
http://img37.imageshack.us/img37/4153/1000376e.th.jpg (http://img37.imageshack.us/my.php?image=1000376e.jpg)
http://img21.imageshack.us/img21/4476/1000375p.th.jpg (http://img21.imageshack.us/my.php?image=1000375p.jpg)
http://img197.imageshack.us/img197/4091/1000374d.th.jpg (http://img197.imageshack.us/my.php?image=1000374d.jpg)
http://img12.imageshack.us/img12/8233/1000373b.th.jpg (http://img12.imageshack.us/my.php?image=1000373b.jpg)
http://img12.imageshack.us/img12/247/1000372h.th.jpg (http://img12.imageshack.us/my.php?image=1000372h.jpg)
http://img149.imageshack.us/img149/7388/1000371g.th.jpg (http://img149.imageshack.us/my.php?image=1000371g.jpg)
http://img14.imageshack.us/img14/9623/1000378n.th.jpg (http://img14.imageshack.us/my.php?image=1000378n.jpg)
http://img127.imageshack.us/img127/8858/018j.th.jpg (http://img127.imageshack.us/my.php?image=018j.jpg)

[TodesRacher]

w/ 14" Linear barrel
http://i866.photobucket.com/albums/ab223/gmcburney3/BT-4%20Sniper%20setup/BT-4Snipernewbarrel002-1.jpg
http://i866.photobucket.com/albums/ab223/gmcburney3/BT-4%20Sniper%20setup/BT-4Snipernewbarrel003.jpg

W/ 6" CQB barrel
http://i866.photobucket.com/albums/ab223/gmcburney3/BT-4%20Combat/BT-4CombatCustom002-1.jpg
http://i866.photobucket.com/albums/ab223/gmcburney3/BT-4%20Combat/BT-4CombatCustom006.jpg

[wabango$]

Harder to read than the Bible^