ACI 6 stage expansion chamber Question

[AmpegBassDude]

I'm looking into Expansion Chambers for my tippman-- I wanted to use an ACI 6 stage--- Obviously I would need a vertical adaptor, and hose--- But I also want to add A Physco Ballistics Drop Forward...... If i were to do this... What other materials would I need besides the vertical adaptor and the Chamber..... How much hose would I need to use to get from the drop forward to the Chamber? Would I be better off just going with the tippmann drop in kit? How many stages is the tippmann kit?

Thanks
Bass dude

[willpill]

its not a drop it kit. you still need to install the va.

i think the tippmann one is 2 stageswhat i did was get the xchamber and the drop.

went to my proshop. then determine from there

[Turambar]

If you've got the money, get a VA, the drop, anti-siphon, and a reg. But if not and you are insistant on getting the x-chamber, then go for it. As for the length, measure out to where the drop would put your asa (with your gun on the ground) and then use a peice of string, strung from the valve to the place where the asa will be. Then once you've got that length, straighten out the string and measure it. That's how long of a hose you'll need.

Also, do you have a Custom? I'm going to assume so..so you will need a 90º fitting for the drop and possibly one for the x-chamber.