Spyder Problem

[JBONE]

Can anyone help me... My SPYDER ONE is leaking air (it seems to me it is leaking from the barrel.) It might be the cup seal. What else could it be.

[big ugly spyder]

check ur valve for o rings make sure the valve pin is in correctly and just check the air delivery(i am not sure if this will help but it may)

[Hsuve]

If it's leaking heavily, your valve is, more than likely, installed the wrong way. Or perhaps you forgot to put your cup seal on. ;) The valve o-ring closest to the vertical adapter could also be the problem.

[ThaFiend]

Originally posted by big ugly spyder
check ur valve for o rings


lol... I know you meant broken o-rings but that cracks me up

[Super Nick]

Your valve could be in the wrong way.

Your valve o-rings could be shot.

You could need a new cup seal.

The face of your valve could be worn.

Your valve spring could be too short.

[toadman7b22]

take some oil and run it thru the gun for about 50 shots with out a barrel and c if the o rings seat and lube up

[PiranhaPro]

Originally posted by toadman7b22
take some oil and run it thru the gun for about 50 shots with out a barrel and c if the o rings seat and lube up

Or just take it apart and oil it the proper way...:rolleyes:

[Lemonjello]

it is proably your cup seal. as they are made of plastic... If it is shot, i recommend a brass one. You will see that your consistancy during heavy or fast fire will improve, plus it wont wear out. Hope that helps