Imp to next level

[Burns]

A. thinking of getting upgrading to Hpa.
1 - Is it worth it?
2 - Steel or Carbon?
3 - Pure energy?
4 - Size for front player? (leaning towards 68 4500)
5 - amount of shots per tank?

B. Freak or Evil Pipe?

C. Tape worm or eclipse?

D. what slick shot part by new designz. ( ive never figured out if its the ram or the hammer that fixes fsdo)

Thanks

[xLiLHockeyFreak]

Originally posted by Burns
A. thinking of getting upgrading to Hpa.
1 - Is it worth it? Yes
2 - Steel or Carbon? Carbon
3 - Pure energy? Sure why not
4 - Size for front player? (leaning towards 68 4500) 45/45
5 - amount of shots per tank?http://www.geocities.com/divadcom/SHOT_CHART.html

B. Freak or Evil Pipe? I prefer Freak

C. Tape worm or eclipse? Eclipse what?

D. what slick shot part by new designz. ( ive never figured out if its the ram or the hammer that fixes fsdo) Eh? http://stores.cipp.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=mipaint&Product_Code=90306760007 ?

Thanks

Edit - Ohh I think you meant the Eclipse solenoid optimizer, i'd go with the Tape worm, although the ESO looks better.

[kent]

A-
1. very
2.carbon
3. very good quality tank i would recommend it
4.68/4500 is perfect in my opinion
5.i get 700 w/o LPR

B-
Pipe- shoots through breaks a helluva lot better than freak, better looking the freak, no inserts to lose, makes the gun louder which is pretty cool lol

C-Dont think it matters
whichever one looks better to you

D- I believe it is the slik shot hamer shaft--not sure though:confused:

[paintslinger14]

The slickshot is the shaft, which is connected to the hammer. The shaft is located on the end of the hammer and you can see the back of it if you unscrew the back cap, assuming you dont have globs of dow between the ram and the cap.

[Burns]

i know the difference between the ram and a hammer. I am assuming that a slick ram would fix fsdo, but when looking for the ram i found a slick shot hammer. I did not want to make a dumb mistake and get the wrong one.

[xLiLHockeyFreak]

Or if you were planning on getting Vision, you can just get the WAS board when it's out. That fixes FSDO.

[Burns]

siack! damn if only i broke my old board a few months later and didnt buy the cricket! how does a board fix fsdo?

[obey]

hey for the was board dose that do anything to help the vison or is mainly on the way the gun shoots?

[paintslinger14]

Ok sorry for the mix up, the slick shaft ram is what fixes fsdo and it does that by being slightly longer than the stock ram and gives a slight increase in effiency for some guns as well. Hope that helpd any.

[PhishPhactor]

Buy a Nitro Duck 68/.45 X-tream, reg tank, awesome

[Dr J]

A. thinking of getting upgrading to Hpa.
if you play tourneys, yes 1 - Is it worth it?
Carbon, steel is to heavy 2 - Steel or Carbon?
Decent regs, five year hydro tanks 3 - Pure energy?
68, 70, or 45 like me 4 - Size for front player? (leaning towards 68 4500)
Depends on gun 5 - amount of shots per tank?

tough, jury is still out on that one B. Freak or Evil Pipe?

Tapeworm or LPR C. Tape worm or eclipse?

D. what slick shot part by new designz. ( ive never figured out if its the ram or the hammer that fixes fsdo)

Thanks

The Slick shot Ram from FSDO was designed to make your ram operation more efficient to lower operating pressure and/or reduce dwell. It does that. It also helps relieve the symptoms of FSDO.

The problem of fsdo is caused by solenoid needing more juice the first time it is shot after a wait. the sp boards don't give the noid the juice it needs. The WAS board solves this problem by having an inline capacitor.



P.S. Beaverbuddy is still my buddy, but he still isn't a beaver.

[Burns]

thanks guys, preciate the help