Ballistic Sports E-bolt

[MiNi_Me469]

Does anybody Know if the E-bolt board from Tippmann will work for the E-bolt kit from Ballistic Sports???

[willpill]

how did you end up with that prob? :laugh:


you bought both?:eyes:

[campcky66]

my guess is no, cos the tippy ebolt is analog...and the ballistic sports e bolt is digital

[Relentless]

it should... if your replace everything from the tube down....

then the board's digital/analogness wouldnt matter...

iono, i think BS sells replacement boards...

[Turambar]

Email BS and find out. Or just get a replacement BS board if that's what you need. Unless you want the Tippmann board..then I dunno. But the best way to find out is to email BS.

[MiNi_Me469]

No I didn't buy both otherwise I would not have posted the question. The reason that I asked is becasuse I have a Ballistic Sports kit; but, the board just died.

I like the way that the Tippmann board fits better than the how the Ballistic Sports board does.

So, Do you know if the boards are interchangable?

I think that they should be because the only differences
that I am aware of is that the adjustments on the tippmann board are done via swithces and knobs; whereas the adjustments on the ballistic sports board are done through different trigger pulls...

[TeamBlackHawk]

Someone needs to put WAS on on an E-bolt, how hard would it be?

[MiNi_Me469]

what
:confused: :confused: :confused:

[Relentless]

Originally posted by TeamBlackHawk
Someone needs to put WAS on on an E-bolt, how hard would it be?
seems like it would be too long to fit in there... if they did, that would be awsome (but expensive)

buy one and find out

:D ;)

[quik]

He wants to know if he could put a WAS(Wicked Air Sports) board on your tippy?

If I'm not mistaken, I dont think they make one for a tippy yet. Try checking out their site. www.wickedairsports.com

[MiNi_Me469]

The tippmann board will fit into the marker no problem; but, I don't want to blow 80 dollars out the door just to find out if will work with the ram that I already have :P :P

[willpill]

ive seen this guy;s

LOW BLOW

and he has like a airsoldier board.

[MiNi_Me469]

:confused: :confused: :confused: :confused: :confused:
what?????

[Relentless]

Originally posted by quik
He wants to know if he could put a WAS(Wicked Air Sports) board on your tippy?

If I'm not mistaken, I dont think they make one for a tippy yet. Try checking out their site. www.wickedairsports.com
of course they dont make one for the tippy. they prolly never will, thats not their market..., they are more after high end tourny markers...

we were wondering if it would be possable to fit a timmy or 'pulse board in there...

i think it *might* work if the board is small enough, but getting the 'noid right and stuff would be tricky

[willpill]

you could


but take serious milling

and maybe some ugliness on the project...


wats wrong with the EBOLT or bsM98e?

too slow? for me 13 bps is more than enough haha

[MiNi_Me469]

The E-bolt is plenty fast enough!!! The problem is that the Ballistic sports board died on me last week.. I really like the waythat the Tippmann board fits into the marker better than what the Ballistic sports board does. They both have the same features ( fire modes, R.O.F. ) etc. The only difference that I know of is that the tippy board has the valve mnted on the board instead of flopping around sepatate. But, I don't know if the tippy ram works on a different air pressure than what the B.S ram does. :confused:

[willpill]

i think they both work around 100 psi

[MiNi_Me469]

:confused: I'm not sure!! I e-mailed Ballistic Sports about it friday afternoon, Hopefully I will have an answer by tommorrow sometime. At least I hope that I will so that I can get my marker going again by next weekend...

[Meph]

The reason you won't see the Timmy or Pulse board working is simple. E-bolt uses a 2-way noid. Those use a 4-way noid. the electronic pulses are completely different and won't work together.


What you need is a Morlock board, www.exarin.com Customize and make your own board. Even add an eye if you want!

[Relentless]

but those morlocks are like 80 or 100 (to lazy to look at site, remember seeing that)... but if you have the cash it would be great :D
And where the hell could you fit an eye (but that would be really cool, thogh :cool:

[MiNi_Me469]

I'm not really concerned about was boards or morlock boards!!! see now you guys are geting inot things that don't pertain to my problem. You guys have been very helpfull though and I appreciate it alot. Hopefully Ballistic Sports Will e-mail me back with an anwser today. I hope that they tell me that the tippmann board will work :wave: As soon as I
find something out from Ballistic Sports; I, will let you guys
know... That way if someone gets on here with the same
question, you guys will be able to help out !!!!!