Eradicator BPS?

[Jinseng]

Whats the most amount of balls per second i could get out of my eradicator, And what mods would be best to improve it? How much improvement could i get with the mods?

[camoman5000]

the website says 5 balls per second, and since the eradicator is exactly the same as the marauder, you're lucky to hit that alone, not to mention breaking so many balls. I am not sure if any aftermarket electric grips fit it (probabaly not, but I dunno), so basically, theres not much you can do, maybe a trigger mod:confused: But thats about all I can think of.

[isaiah]

you can do a trigger job, here's a pic i made for a stingray, but it'll work on any gun if you think about it for a while. it's just to show you the concept, and you have to figure out how to implement it on whatever you've got.

http://web.umr.edu/~ikellogg/paintball/trigger%20job.jpg

when you pull the trigger, it pushes the sear up and rocks the back end down out of the way of the hammer. the sear preload effectively keeps the trigger halfway pulled for you already. the rear limiter keeps the trigger from going too far back after you have fired. this makes the gun much faster.

[Jinseng]

thx guys that was really helpfull please let me know of any othe mods if u can. i dun worry about balls choppin ever since i changed the barrel it works great.

[Cx Threepio]

Here are a few things i have done to my Eradicator-

Drill about a 2 mm hole on the gun, just under where the Elbow slides on. It releases gas and keeps the paintballs from blowing back into the hopper.

I made a Stock out of an Aluminum Pole by Cutting it the length I wanted it Horizontally, and i cut a 4 inch pole to glue to the horizontal one i cut to make a sideways T shape. then i Drilled a hole in the gun where i wanted the stock to connect and glued the other side of the horizontal pole into the hole.

You can Link the two pull pins that keep the bolt in and the handle on, it lets you pull both Pins out at the same time.

2 More things i did was take off the barrel so it wouldn't break balls, and i painted it black.
Sorry if all that was a hard to Understand, E-mail me at cxthreepio@yahoo.com if you need pics.

[Punk and Dirt]

with a little work you can put spyder frames on it.