custom milling job!!!

[mxmaniac2000]

Hey, i have decided to get some milling done on my bko! I was wondering if anyone out there had any sweet ideas?

[gregicd]

YES......I have a few......

[ImpYa]

Originally posted by gregicd
YES......I have a few......

Greg you tease us enough over at pbnation....dont start doing it here too.:laugh:

ImpYa

[Sir Stunna Lot]

stock gun from ICD

http://icdpaintball.com/uploads/gold-gun6.jpg


here's my custom/modified bko (idea from GZ timmy and/or Rat Impulse)


http://www.digitalpose.com/mbr/1/22203/p/401836_6513044234905475907_vl.jpg

http://www.digitalpose.com/mbr/1/22203/p/401835_1054270512835768773_vl.jpg

http://www.digitalpose.com/mbr/1/22203/p/401834_2628257553387482030_vl.jpg

the 3 last things i need are the OTB frame... the sp mod... and the chaos chip

[ImpYa]

Thats pretty nice milling Sir Stunna Lot!:tup:

Did you do that yourself?

ImpYa

[Sir Stunna Lot]

yup

[ImpYa]

Nice...what did you do it with?

ImpYa

[Sir Stunna Lot]

dremel bits attached to a bench press drill for most cuts ... on some other cuts... good old dremel by hand

[CaptainFuzzy]

The GZ milling isn't exactly my cup of tea but that's pretty cool Stunna, props to you

If I was getting some custom milling done I'd get something really aggressive... like suprbugman's pride style or the like...

[Sir Stunna Lot]

thanks all... i was really afraid that i would f' up.. but.. it turned out decent.. now to get it anodize again

[ayzian]

Nice milling Sir Stunna Lot.

I had an idea like that if I was to mill my own BKO.

Good job!

[ImpYa]

How many dremel bits did you go threw?

ImpYa

[Sir Stunna Lot]

lol.. never thought anyone would ask.. i went to a full tube of disk... of course.. i broke most of them before they really got worn... and i had to change disk often since the metal was so thick that smaller disk wouldnt do much anyway... so yeah... i would say i went though a full tube

[ImpYa]

Well off to the hardware store to get some dremel disks. Anyway i plan to do my own milling today. Im gunna take it in stages. If i get the first stage done...ill post it today.

ImpYa

[Sir Stunna Lot]

good luck! and take your time... remember.. measure twice, cut once... unlike photoshop, there's no undo on this job

[shtson]

Look @ the bonebrake, reflex and gs bushy's as well as the other ones, you could kinda of combine 'em or get some cool looking milling from them, don't copy exact tho, it's not cool and it's illegal:D

[ImpYa]

This is the first stage...most of the major cuts have been done and burrs removed. It took me 2-3 hours to do...i lost track of time.

Tell me what ya think...

http://pbgal.nevernet.com/albums/album01/aao.sized.jpg

http://pbgal.nevernet.com/albums/album01/aan.jpg

Stage two is going to be mainly minor cuts and polishing.

Sir Stunna, what did you use to polish your BKO?

L8ter

ImpYa

[mxmaniac2000]

like the work so far, it looks sweet!

by the way: BUY A NEW CHOUCH!!!!

[ImpYa]

Originally posted by mxmaniac2000
like the work so far, it looks sweet!

by the way: BUY A NEW CHOUCH!!!!

Thanks!

and

LOL! Its the chouch in my basement.

ImpYa

[Sir Stunna Lot]

very nice start

im using blue magic liquid metal polish.. i guess anything would work.. just gotta apply it often

[ImpYa]

Originally posted by Sir Stunna Lot
very nice start

im using blue magic liquid metal polish.. i guess anything would work.. just gotta apply it often

Thanks.

and

Thanks again on the polish.

ImpYa

[ImpYa]

Hey Sir Stunna, how did you get your finish as good as it is? I have 600 and 800 grit sandpaper...that is what i was thinking of using to get out the minor scratches.

ImpYa

[Sir Stunna Lot]

600.. damnn.. i use like 80 right after dremeling to even out the surface and used 180 to smooth it out

[ImpYa]

Originally posted by Sir Stunna Lot
600.. damnn.. i use like 80 right after dremeling to even out the surface and used 180 to smooth it out

Alright thanks. I still need to even it out just a bit more and im going to use a wire polishing brush bit that i picked up.

I think ill start out with 80, then 180, 400, then wet sand it with 600. It should be real nice then.

Ill post pics when its does.

My third stage will be some sort of engraving to make the front look cooler.

ImpYa

[CaptainFuzzy]

Nice Impya, coming along good it seems...


It's COUCH darn it...

[ImpYa]

Originally posted by CaptainFuzzy
Nice Impya, coming along good it seems...


It's COUCH darn it...

LOL...the first time is dont hit spell check, is the time when i need it!

ImpYa

[JustinGB]

i got my body milled too :) it's simple but nice. this one was done by a mill tho

http://icd-owners.com/icd/modules.php?name=coppermine&cat=10220

can someone tell me how to sand and polish? and what tools and materials to use

[JustinGB]

anyoen else have any ideas on what else i coudl do to my bko by myself? i'm really bored and i want to make my bko more unique... lol

[Sir Stunna Lot]

like i said.. i have competition now :D

but nice job though, to polish it.. get a dremen and polishing bit.. get some metal polish like the one i mentioned above and polish it like u would polish a car.. apply it and use the bit to rub/smooth it in.. u'll need to apply it after everytime u play

as for customizing.. bust out the dremel and some cutting disk!! :tup:

[JustinGB]

lol aight! your on sir stunna.. i gota go buy myself a dremel. are all dremels good? like i see many w/ different attributes, mainly the rpms. what's a good rpm? i don't really care if my body comes out pretty bad, lol i'll just buy a new one :)

i was thinking of cutting a hole in the tray, maybe so that the chip can slide out, or you put the battery there instead. so that's its easier access.. lol how woudl i cover it tho? like to have an opening/closing door of some type

[Sir Stunna Lot]

dont be cheap on dremels... buy a good one made in the US of A with a high rpm

as for your project... ::shrugss:: good luck!

[JustinGB]

what's a good rpm?

[MicroB]

Preferably one you can't count with your fingers.

[JustinGB]

obviously :(

[PRORAPTOR]

just get one with the DREMEL name....Also make sure it has adjustable speeds

[CaptainFuzzy]

Originally posted by PRORAPTOR
just get one with the DREMEL name....Also make sure it has adjustable speeds

And a cupholder.. all the high class dremels have cupholders