Sto Asa?

[TASTYBIZKIT]

Does the STO come with an ASA, I assume it doesn't. What are some good ASA's, I was looking at the CP ASA. Also does anyone know if the in line has a guage on it, or if there is a presure gauge on the gun at all?

Thanks in Advance

[Landon]

no, but u can install a pressure gauge on the Ergo reg that comes stock on an STO... oh if u are using Co2 there is no point... u can only measure co2 by weight

[unknown]

do you see a reg on a stock sto? then ok, it has an asa.

[stobooy01]

Does the STO come with an ASA, I assume it doesn't. What are some good ASA's, I was looking at the CP ASA. Also does anyone know if the in line has a guage on it, or if there is a presure gauge on the gun at all?

I have the CP cradle with on/off. Yes, it is fairly decent it does it's job.
Two bad points about it;
1) The on/off can back all the way out. You can use a small socket wrench to fix this.
2) It has only 1 screw holding it onto the drop forward which can come loose. Make sure its on TIGHT.

No, there are no external guages with the STO. You can add them though.

[pbmstr]

my sto shoulod be here to dy or tommorow, is there a allen screw you take out and put the gage in with teflon tape? that easy?????

[TASTYBIZKIT]

Yeah, can you just throw a DYE gauge in the inline, or do you have to drill.

[ptflyer]

well if you get a mini guage like the 32* or I think dye makes one small enough...you can just screw it into the bottom of your front block....instead of the plug....

this way your guage is under the front block and less likely to get hit....

(thats where I put mine...)..