Do any mags have switchable (vertical feed and side feed) feeds?

[AllOleander]

Other than the emag?


or can you just get a micromag or something custom made side feed?

(for a warp or other pressure fed loader of course)

[flyingdeadbody1]

i would recommend just a powerfeed body for a mag, but if you want vertical feed, a chrome vertical feed body can be found at bttpaintball.com for 150. (if i remember it right)

[Halliday]

You can buy different feed bodies and just switch them out in about 5 min.

[blake_sw]

My mag has a PTP powerfeed. It used to be standard feed but the previous owner cut it down to nothin and fitted the PTP feed on it. Here's a pic. Yes, I know it's hard to tell.

[AllOleander]

Well..i was talking about side feed :)

Can you switch a vertical feed to side feed, or a power feed to side feed..

Like i would really enjoy a side feed mag..can i get one custom made? do some mags have a little piece like the emag that switches out (from vertical feed to side feed)

ANy ideas?

Could i get a side feed put in? or would it just be best to use a powerfeed..and then on the powerfeed do you swithc the endcap on the feed and make it upside down so the warp tube doesn't have to go aroudn to the top of teh gun..?

[Halliday]

Side feed...as in straight out parallel to the ground? Other than the Modular E-Mags, no.

Yout can have a Warp Feed feed from the bottom and use a long nosed power feed plug at the top.

Like so, (not my mag, just a cool looking one I saw.)