Dye Stickys On Piranha

[PiranhaPB913]

I Just Got My Dye Stickys Grips Cause All Yall Told Me i Should. Now Does The EXT Pro G3 Have A .45 Trigger Frame? If So, How The Hell Do You Put Dye Stickys On It??????

[PiranhaPB913]

Oh and, PiranhaPro, What Kinda D.F. you got on your gun????

[PiranhaPro]

Stickies:

Put them in some HOT water for about 30 seconds, take them out, and put them on your frame. Yes, its a 45 frame. You might need to cut some off the bottom to fit the 2x trigger gaurd.


Dropforward:
Its a PMI Perfect drop forward.

[Saiyan_warrior]

I didnt put any in water and they were a biotch to put on, but I had to carve some of it under the trigger guard so it will fit.

[Nitro]

you have to cut the a lil around whe wrap around part so it fits your trigger guard, then also cut were the release sear button is and maybe the saftey but i forgot if i cut mine. be very careful when you do it theres a spring for the safety and if you lose that no safety, i dont mine it but u might

[PiranhaPro]

Exactly. If you put them in some VERY hot (almost boiling) water for about 20-30 seconds they will go on easily.

Do not put them in the water too long, don't let them melt:)

[Saiyan_warrior]

Heh I lost my safety spring, but I dont really need it it still works without it it just slides around sometimes, but I just uncock my gun after a game or something.

[PiranhaPB913]

Will They Stick To It Or Do I Have To Put The Screws In Too???????

[Nitro]

hhahahahah newb!

you need screws silly, dont let the name fool ya

[jdw_56]

hehe, funny boy. no offense.;) yah i suggest using the screws

[PiranhaPB913]

Hey, is there any where i can buy the springs and the little ball to the safety smitch on the EXT Pro???????

[Nitro]

hehe i warned you,

all you have to do is send in your warenty card and tell them about it. check on pmi forum some 1 recently just did that and john from pmi gives all the info

[PiranhaPB913]

How Do I Install the Dye Stickey Grips Into The Original Trigger Frame Of The EXT Pro??????

[PiranhaPro]

Take screws out......take old grips off. Put new grips on, put old screws back in...

[PiranhaPB913]

The Screw Holes Dont Match on My Trigger Frame, The old grips were on by 2 screw holes and the dye stcikys have different locations for screws do i have to drill new holes??????????????

[Saiyan_warrior]

DONT drill anything. Just boil it in some hot water then attach them with your old screws. I tried to use the screws that came with the dye stickys but for some reason they wouldn't fit so i just used my old screws.

[PiranhaPB913]

So I Have To Drill Through The Grips????? I am so confused

[MuckRaker]

Originally posted by Saiyan_warrior
DONT drill anything. Just boil it in some hot water then attach them with your old screws. I tried to use the screws that came with the dye stickys but for some reason they wouldn't fit so i just used my old screws.

Same here ... I was PO'd because the screws that came with the grips looked better than my old ones ... but, they were too wide for the screw holes in the grip frame.

Also, be careful you don't strip a screw when you're threading it. I got got one that won't come out now. ERRGGHHHH.

[PiranhaPro]

As I said before,

Take off old grips

Line up the Dye grips

Use your old screws


They DO line up, just takes some stretching

[PiranhaPB913]

Oh My ****ing God, You Can't Strtch These Holes To The Other Ones Is Impossible, Stop Talking Non-sense!!

[Saiyan_warrior]

Umm We are making sense. If its impossible then how did I do it? Next time use some common sense.

[MuckRaker]

Do what Pro suggested, put the Dye grips in hot water first, that'll loosen up the rubber. I didn't do that and it was difficult to get them on, but it can be done.

[PiranhaPB913]

hahahhahahahahahahahahahahahahahahahahahahahahahah ahahahahahahahahahahahahahahahahahahahahahahahahah ahahahahahahahahahahahahahahahahahahahahahahahahah ahahahahahahahahahahahahahahahahahahahahahahahahah ahahahahhahahahahahahahahhahahahahahahahahahahahah ahahahahahahahahahahhahahaha... i found out what was wrong... hahahahahahahahahahahahahahahahahahahahahahahahaha hahahahahahahahahahahah... i ordered the auto-cocker type dye stickies hahahahahahahahahahaha i am the biggest ******* in the whoel f*ing world.. sry guys i apolagize

[Saiyan_warrior]

Ummm Dye stickys will fit on mostly any gun that has a 45 grip like the piranha and the autococker. .

[PiranhaPB913]

Yea but the ones that i got had no screws in middle only had one in bottom right corener and 2 on top no in middle :)

[PiranhaPro]

Um, cocker and Piranha gripframes are the same. You got Angel Dye grips...

[Hsuve]

Two on top and one on the bottem? Aren't those LCD type Sticky grips or somethin'...?

[PiranhaPro]

Yes, those are LCD grips.

[Saiyan_warrior]

lmao...But why would you order them?

Did you go under the angel accessories and ord them or something :confused:

[PiranhaPro]

What was that? A mod making fun of a member? Alert the media!:)


***NOTE- This is a joke, and only a joke. I know SW very well, he knows I'm kidding. Do not make a big deal of it...***

[jdw_56]

God PPro WTF is your damn porblem!?

J/K Dude,:D

yeah and like SW said, wouldn't it have said like Angel LCD DYE sticky grips or something? someone needs to werk on their observation skills...:P

[paintballhead5]

Ok PiranhaPB913 ur making ur self sound like a complete idiot. Just tell us if on the grips there r 2 holes on top and 1 on bottom. If not just screw on one side then stretch them over and screw on the other side. They fit perfectly on my fishy.

[PiranhaPB913]

I Know I Am A Complete Idiot I Ordered LCD Dye Sticky Grips and put you guy through the rouble of helping me getthem on which never worked and never could work. im sry guys i will look into things b4 i order now.. thnx anyway

[PiranhaPro]

Originally posted by paintballhead5
Ok PiranhaPB913 ur making ur self sound like a complete idiot.

That's the biggest case of the pot calling the kettle black I've ever seen.

[PiranhaPB913]

**** Off Now Your Just ****ing Dissing Me I Made One Mistake Damn

[Saiyan_warrior]

When you ordered them did they Say LCD dye sticky grips??

[PiranhaPB913]

No i searched for them then it poped up with one find and i clickd on it and it said fits all 45 frames so i thought that was it

[jdw_56]

you are taking the old panels off right.....this kid i know didn't know to do that and was gettin all pissed and he's just an idiot.

[PiranhaPro]

Originally posted by PiranhaPB913
**** Off Now Your Just ****ing Dissing Me I Made One Mistake Damn

Um, I was DEFENDING you, re-read my post.