need to know

[PiRaNhA69]

on my cocker sometimes the trigger gets stuck.it does it every once and awhile.so please help.

[JDoGG]

u need to give us a few more details. all i can think of right now is safety on or stuck bolt.

[PiRaNhA69]

it happens when i pull the trigger back and it will get stuck and the bolt and back block stays back w/ the trigger.

[Silent Knight]

so it doesn't come forward at all? untill you degas the gun?

[zenmaster]

how much aftermarket work has been done on the gun? sounds like either a weak/binding trigger spring, or your LPR's pressure is too high

[PiRaNhA69]

silent knight it also happens when the marker is degassed too.so i might take it to the store.and the only after market stuff is a barrel,drop forward and this really kewl quick disconnect from nw paintball products.

[Lemonjello]

That definately sounds like a weak, but proably a binding trigger retun spring. To fix this... or to see if it is the problem. Take your trigger frame off. there is a little spring under the trigger, and it is a little trichy to get mack in, but you can do it with practice. replace this spring with one from a BIC click pen, or any other clik pen, but you may have to cut some of the spring first. then put the spring back in put all the internals in the frame again, and put it back on your gun. then try... if it happens again, let us know.

[PiRaNhA69]

i put a spring that i got out of a pen and it worked.even gave a lighter trigger pull.