Soleniod Leaking!

[Omega6_Virus]

Okay, I foundout that I was using the wrong Dwell setting, 16ms instead of 6ms.
BTW I found that I have a black and green wire from my soleniod by looking at the connector that plugs into the cuircit board. Thats the same thing right?
So after adjusted my dwell settings I made sure my regulator PSI where correct. My lp reg was below 50. When I would turn it up I would hear air leaking from my inside my grip frame. It sounds like the soleniod. When I put the gun upside down the leaking stops. Whats the problem?

[Morphious]

I replyed on PBNation

[A damn fool]

Can someone please post this whole dwell to wire color thing? I set my dwell at 12, but i have no idea what wires you are talking about, so im not sure if its too high or too low of a setting. Which wires should i be looking at, and which colors mean what dwell setting

[Omega6_Virus]

Okay, open your grip frame on the LCD side. Once that is open look at the cuircit board. At the bottom of the board there should be a little white connector with 2 wires coming out. They will be the only wires there on the white connector. They lead to your soleniod. If you have two black wires use a dwell setting of 14 or 16ms, if they are green and black use a dwell of 6ms.
Instead of setting the dwell everytime you turn on your marker, use the internal DIP switches. The standard manual has it listed but it is easier to understand with the new manual that you can get here: http://www.countypaintball.com/IntimidatorManual.pdf
you will need adobe acrobat reader though, you can get that here
http://www.adobe.com/products/acrobat/readstep.html
Then once you get the new manual scroll down to about page 11 and it will explain everything there for setting dip switches so you don't have to mess with the dwell ever again.

[A damn fool]

Omega , did u ever fix theleaking from ur solonoid? If so,how?

Morpheis, i know u said u posted on pbnation, bt could u post what u said here?

[Omega6_Virus]

I haven't had the chance to sit down and play with my gun for a while because of school. I am hoping it is the air lines to and from the solenoid.