Lil' help on the intimmy needed

[maximus532]

Hey im somewhat of a newb...how high maintenance is the Intimmy? if so how do i go about learning how to take care of it?:confused:

[Richy_C]

moved

[JorynnRace]

You learn from the best thats how! Sorry I don't have time to go into specifics, but there is another post here somewhere that outlines maintenance.

Basically maintenance involves greasing the bolt and hammer after every use (not imperitive EVERY time, but recommended)

Then greasing the poppet or valve pin after every second to third time playing. (can also grease after every play, but again, is not imperitive)

The amount of greagin depends on the amount of paint you put through it, if you go through a case or more in one day, then you should grease everything when yer done, or before the next time you play.

The trickiest part in this whole thing is greasing the poppet/valve pin. It requires removing the regulator base, which means you have to remove the grip frame.

After a few times though, you'll get the hang of it. The poppet/valve pin MUST be kept greased. If it is NOT greased it will wear out the cup seal, and this will cause internal leaking. Learn from my mistakes.... GREASE THE POPPET! hehe

once you have the newer colour manual available here:
http://www.teamjoker.com/Data/Intimidator%20Manual.pdf

then dissasembly is no sweat... just don't take the entire grip frame apart like they say... its TOTALLY unnecessary.

hope this helps..

[elTwitcho]

http://www.pbreview.com/forums/showthread.php?threadid=8693&pagenumber=2

[SH4YD33]

hey twitch who is the mod of the electro forum? i think they should make that a sticky in this forum.