Upgrades for my Pulse

[ojadfoijsdfoijs]

I have a non-vis. but i dunno if mine is made after march 2003 or what, but im pretty sure its not limited at 13.8 bps. Anywayz, I was thinking what i should do: I break balls alot when i double tap, but I have a rev. xboard. What happened to the turborev boards and a new impeller. Would that make it stop breaking? I think im going to get a Halo B, and a new I-frame. But on the accuracy level, I got the 14 aa 2 piece, so what would be the next best accuracy upgrade? Thanks!

[ojadfoijsdfoijs]

Sorry i forgot to ask how hard is it to install a I frame>? thanks

[ojadfoijsdfoijs]

S*** one last thing. I heard in order for a I frame to work with a smart parts drop forward, you have to have a special part. I think it is the15 degree thing that tilts your reg forward or something. Can anyone tell me if this is true and what its called. Thanks

[BigAl06]

well my 2 cents would be that the Halo B would help u in the ball chop department...unless the paint is breaking in the barrel, in that case its ur paint to barrel match thats off, far as accuracy goes, i would suggest a new bolt maybe, jus get the rat internal kit from epbo and that will give u a bolt and all the other stuff u need if ya have that kind of money.
About the i frame, from what i know its the grip frame and curcuit board tray together so all u would do to install it would be to put ur board in the tray. haven't heard anything about it needing a 15* asa though :|
hope this helps some

[Mr. Sinister]

I have an I-Frame on my impulse and I didn't need a 15* asa for my vertical max flo, and installing it is as simple as pulling off your old frame and putting your circuit board in the I-Frame. hope this helps.