impulse problem help?

[mike16]

ok i have a 2001 impulse vert max, i use co2 on it... its pretty much all stock except the trigger
anyways when i shoot every 4 to 5 shots the bolt stick in frontward position and lets out air... and i have to push it back everytime it happens.
i thought i cleaned it good. anyone know whats wrong?
i tried compressed air on it to and it did the same thing... so maybe its dirty? i dunno i cleaned it and it did the same thing
plz help thanks

[BigAl06]

sounds like a bolt stick problem...try getting an air mod like a tapeworm or lpr...tapeworms are cheaper but if u got the cash get the lpr, that should help

[paintballa888]

u still micht want to get a antisiphon. with out ot it would screw up the soleniod(which i just did) and its not pretty, or cheap. but the antisiphon is cheap. i learned the hard way

[mike16]

it has an anti siphon tube in it, and an on off valve

[LTJRocks77]

get a tapeworm or lpr

[mike16]

but it wasnt doing this before... what caused it?

[Kyle's Ghost]

did you grease and lube the required parts with dow 33 shocker lube lately?

[mike16]

not the hammer... could that be it

[DynastyKiD69]

tapeworm is all you need man like 20 bucks and your set

[mike16]

is it hard to install

[HockeyMW5]

dont lube your hammer...you lube your ram...lubing hammer might =FSDO. maybe now your gun is broken in. clean everything

[mike16]

what part is the hammer and what part is the ram

[LTJRocks77]

the hammer is the big black thing the ram is the shaft that connects to the hammer.

and smart parts caused ur bolt stick now buy a tapeworm to stop it

[slushii]

this happend to me all I did was just take apart everything lube the parts up and then I ran my gun at like 170psi and set the dwell so my gun was shooting 280fps and the bolt stick stopped. also unscrew the hammer cap and clean out all the excess dow 33 back there.