Pure energy Tanks

[NickVanryn]

Hi, I just bought a pure energy 48 3000 psi steel tank. I was wondering if there is any problems with it. Cause when I shoot my gun I get major down shoot. Like I can watch my gauge go from 260 to 0 in two shots. I dont know wahts wrong. Is it my tanks refresh rate or something?

[lonestarrules]

where did u buy your tank and what kind of gun do u have?:eek:

[NickVanryn]

I bought it at a pro shop in toronto ontario. And I got a b2k2 with pds

[Scorpius]

I can't help you, but I bet PRORAPTOR could, why not throw him a PM asking for help?

[PRORAPTOR]

What is the output pressure of the tank? About 850PSI? Is the tank experiencing a lot of shotdown? Is the guage on the tank dropping from 260 to 0?

I say take your regs apart and clean them and re-lube them, tanks very rarely have shootdown problems...

[lonestarrules]

do u live by the pro shop if so ask them for help or take it to one in your area.:eyes:

[madgoat33]

When i had this problem with my PMI tank it was because i had my/on off screwed in too much...if u dont' have an on/off unscrew ur tank a little and see if that was the problem...also lube ur hpr....

[NickVanryn]

I have no on off switch. but its not the gauge on the tank thats going down its the gauge on the gun

[legion]

I had a similar problem on my BKO for a while, it turns out it was my HPR. It didn't go away until I got a Sidewinder.

[PRORAPTOR]

you need to take your HPR and LPR apart and clean them. Then lube them with some quality white lithium grease or DOW33

Also make sure you screw your tank in as far as you can