Any clue as to what barrel this is?

[chevy123]

http://big_balls8.tripod.com/barrel.jpg

I know its a PMI, but cant figure out which model it is. BTW- thats a spyder TL plus

[Edited by chevy123 on 02-25-2001 at 03:08 PM]

[MuckRaker]

If it came stock on a G2 series marker, I think they call it the PMI Perfect Pursuit barrel. It's similar in looks and design to the PMI Razzor barrel.

[A damn fool]

i thiink its the razort. My friend has iyt, and it works pretty good. Its reall accurate.

[chevy123]

well by looking at the picture here (http://store6.yimg.com/I/xtremepaintball_1622_357454), I can tell its not the perfect persuit barrel since the perfect persuit barrel has those holes all the way on the tip ( not the swivly ones, i have those). Also, it says its 11", mine is 14".

[A damn fool]

my firend has a 14 inch one, same exact thing. Is the botme like a square almost? oif so, itsa raxzor. I just got a question, if its ur gun, how come u odnt know the barel?

[PiRaNhA69]

http://www.pbreview.com/fpics/PiRaNhA69022501164629ceramic1.gif if it looks like this, its a pmi ceramic.

[chevy123]

Yeah, if thats a perfect ceramic barrel, then what is this? (http://www.pbreview.com/462/1/0/). Another thing is , when i roll a paintball through my barrel by hand, they get stuck, and its really hard to push them out, only way is to actually shoot them through the gun. The most i get at chrono with the barrel is 260-270. Any advice? Also, what kind of oil should i use for the gun?

[TLplus84]

paintball oil wize, use paintballl oil, like Gold Cup or KC. Never use synthetic oils cuz that will swell your orings, and WD 40 will dissintigrate them. ABout your paintballs, use smaller ones. THe bore size of your barrel is too small, you gotta get smaller bore paint, like Marbalizer. And if those roll out ofyour barrel, you gotta get somethnin like Big Ball or PMI Premium GOld

[chevy123]

Alright, ill try Marbalizers. also, I have a TL Plus, Pmi perfect ceramic barrel, some cheap indian creek 200 hopper, 20oz Tank, and a VL elbow. Anything i should upgrade quickly? or a certain product which is a priority for this marker? I am thinking about a 12v or 9v hopper... which is better for the TL?

[MuckRaker]

Upgrades are subjective ... On the hopper, I wouldn't get one unless you are chopping balls like crazy because they don't feed into the chamber fast enough, or if they are getting stuck in the elbow.

[chevy123]

I was thinking, maybe i should also try this (http://www.xpaintball.com/proteamprodb.html)