PDA

View Full Version : hey you come here!!

paintballa888
09-07-2003, 05:39 PM
how much of a velocity change would there be if you buy a equalizer bolt and not get a heavy hammer. i did that and its not shooting ovver 150fps
PhishPhactor
09-07-2003, 05:47 PM
the board shouldnt effect the fps, you need to adjust your dwell. you should know this. with new performace parts you almost always will need to adjust the dwell.
paintballa888
09-07-2003, 05:50 PM
my dwell is at full and my pressure is at 200. its some thing besides the solenoid or board. its probably a hammer or a vavle.
PhishPhactor
09-07-2003, 05:55 PM
turn your dwell all the way down, then put your pressure to 180. slowly raise the dwell shooting 3-4 shots per click. it will work. if not, try striping down your pulse, clean it up, regrease it, and then it will work.
paintballa888
09-07-2003, 06:20 PM
its not the board this has been a problem for a while. its not the dwell. its not soeniod. this was when i bought it. will not shoot over 150.
LTJRocks77
09-07-2003, 06:21 PM
it should have dropped maybe 20 at the most. you need to adjust your gun again
paintballa888
09-07-2003, 06:24 PM
its was like this when i bought the GUN. its nothing to do with the bolt then. probably the battery? maybe the vavle? ans reg gauge?
Zujin
09-07-2003, 06:56 PM
ALWAYS try a new battery when something is going wrong. ALWAYS
paintballa888
09-07-2003, 06:58 PM
just gave it to the guy across the street that owns a shop. he's still stunned
PhishPhactor
09-07-2003, 07:00 PM
Fresh Batt's for an Impulse is like Cocain, get's ya up and moving.
LimeRatImpy
09-08-2003, 11:47 AM
-new batteries
-strip down and clean the max-flo that where all the air is being regulated at:idea:
paintballa888
09-08-2003, 01:54 PM
nothing to do with abtteries im telling you that. i dont use a maxy. i use a ans gen-x 2. do u thing it could be the gauge.
sIc
09-08-2003, 02:04 PM
Clean all your internals.
paintballa888
09-08-2003, 03:44 PM
nope
LimeRatImpy
09-08-2003, 03:55 PM
check your balance of internals, go to the FAQ
paintballa888
09-08-2003, 04:59 PM
its not it
LTJRocks77
09-08-2003, 07:02 PM
heres what i say do get your pressure as high as you possibly can and adjust the dwell from there
the_big_wazzoo
09-08-2003, 08:52 PM
maybe its because your using that reg on co2.. (i ono how co2 tolerant it is, try cleaning it)
paintballa888
09-09-2003, 04:32 AM
forget it, this this is so cool and fixable. :mad: (sarcastically)