Get your Dragun appraised here!

[Calebd2]

Don't start a new thread asking "how much is ______ worth?" or "is this a good trade" post what you're selling here and someone will give you an estimate on its worth. Please format it as:

1. The marker and its condition (great, good, fair, bad, poor)
2. Marker's age
3. Accessories and their conditions
4. modifications made
5. any comments on scratches, blemishes, etc.

[BOB_IS_COOL]

Good Caleb, we need one of these.

[Nicadaeus]

What is a spyder compact 2 in 1 worth?bout 1 year old, barely visible scartches on barrel for regular use, all stock.I know its not worth too much, but I don't need it anymore.

[Calebd2]

You should really try the Spyder appraisal thread over in Kingman. But I'll tell you anyways

A stock spyder 2 in 1 is worth about 40 bucks

[Spleen]

M3 Pi-E2
14" Teardrop
CiP Stick Trigger
CiP Delrin Bolt
Maddman Springs
47-3k Pmi (NEW)

The marker itself is about a year old. There is one small scratch by the trigger pin (doh) but other than that its in really good shape. It comes with the stock parts also if that matters (i already sold it... just wanna see what u guys would say)

[evan123]

i dont know how much m3 pis cost new but i am going to shoot for 190 on this one, to help out with the thread.

[TM pro TC]

190 seems about right...

[Calebd2]

180

[Atemp_Myth]

How much would you pay for a year old black BD LED. It has the Check-it 15degree assault block, Check-it delrin bolt, AKA tornado valve, 14"freak SS back with .689 insert, Evil Detonator Reg, 32 degree drop, 12v Revy, and a Crossfire 47/3000 tank?

[Calebd2]

Nice setup.

Somewhere around 260. But you could probably get more if you split it up.

[Spleen]

around 180 - 190? looks like he got an alright deal.. i sold it for 170 if i remember right.

[creature55]

M3 Sniper
12 in ACI Barrel
Check it Sweet Spot Stick Trigger

I dont remeber what i payed for it

[Calebd2]

190

[bird]

BD Compact, max-flo horizontal low pressure reg, benchmark gas thru grip, macroline kit, dop universal drop, shocktech low pressure chamber, check-it 15* assault block, maddman rocket valve, spudnukl low pressure bolt, spring kit, zenitram trigger.

[Calebd2]

200

[Delvecchio]

Black Dragun Basic

Looks dinged, but works fine.
1 year old this month
Shocktech Superfly bolt, CP Flame drop, Freak Jr. w/ 693 insert...

[Calebd2]

145

[Rentiak]

1. The marker and its condition (great, good, fair, bad, poor)
2. Marker's age
3. Accessories and their conditions
4. modifications made
5. any comments on scratches, blemishes, etc.

1. Black Dragun LED -- fair to good condition
2.1.5 years old (previous owner didnt play with it very often)
3. Some aftermarket barrel, dont know manufacturor, but perfect condition, small barely noticeable scratch on exterior
4. new dropforward
5. a few minor scratches on exterior of gun, issue every once in a while with gun firing, but fixes itself quickly

[Calebd2]

145

Hard to appraise when you don't know what kind of drop/barrel it is. :|

[Knuckles904]

What about a 1 year old m3 sniper in near perfect condition (not even a case of paint thru it) no upgrades. how much more if I add a tear drop barrel. thanks

[King-Smurf]

dragunfly led stock only shot 20 times grey in colour

[Calebd2]

Dragunfly- 320
Sniper- 170

[alexrusek]

ok its a "twisted dragon" any history and an aprasiall is apreciated


http://www.pbnationmagazine.com/data/72/10659689831factory.jpg


"twisted dragun"
year old(maybe?)
no blemishes

LCD Frame--BLue Light
Twisted LPC*not pictured*
BL Torp
High Flow Valve
Delrin Bolt
Twisted PB Body
Custom Anno
Fugly Lapco Drop
SS
2 piece stock barrel(what is it?)(2 piece--threads on both ends are spyder)*picutred*
14" AA Barrel*not pictured*
macroline
Brand New Zenitram Blade Trigger*Not picutred*
2 guages
high flow VA

[Atemp_Myth]

Originally posted by Calebd2
Nice setup.

Somewhere around 260. But you could probably get more if you split it up.

I got $265 for the package. Good Call.

[Wasted4life]

how about a spyder aggressor xt
in good condition with a 9 oz tank

too lazy to look on kingman (btw this is my old gun looking to pick up a little cash )

[TeamSystemShock]

How About:
2002 Green Black Dragun LED
16" 3A Barrel
14" 2002 All-American Barrel
Stock Barrel
20 oz. Co2

[evan123]

alex- 270

systemshock- 120 if not less

[alexrusek]

holy shizzle...i bought it for only 160

[Calebd2]

Wow man, that Twisted Dragun is SEXY! It's made by Twisted Paintball... I'm not really sure what the worth of that is, but I'll guess. I'll do some research it sometime and see what I can come up with

Twisted Dragun- 285
XT (try Kingman forum next time)- 50
Green Dragun LED- 160 (I'd split the barrels up. Most people don't want two barrels.)

[The Dark Knight]

Pi M3 Black Dragun LCD
about 1 year old
condition is good-great
cp flame drop
check-it sweet spot trigger
dye boomstick (glued)
12v revy w/x-board
20 ounce c02 tank

and most importantly:
LOVED AND CARED FOR~~!!
:wink2: :agree:

[Calebd2]

215

[bildo]

wasted4life: ill give u 15$ for gun and tank

[B0mb3r[M]an]

2003 dragun lcd
used about 5-6 times
perfect condition (think im missing the drgun sticker)
no scrathed or dinges
black in color
less than a year old
cleaned and re-oiled every play

[#DragunVoid#]

Blue black TES
with all timmy internals and frame. Includeing the regs.

[evan123]

bomberman- 180
2xs- with all the internals- 375

[godp777]

1. The marker and its condition (great, good, fair, bad, poor)
2. Marker's age
3. Accessories and their conditions
4. modifications made
5. any comments on scratches, blemishes, etc.


1.GREAT Brand new 2k3 Dragunfire LCD Full Function, Chrome lcd trigger frame, Black to Grey fade anno, 2 piece barrel
2. 3 weeks old
3. Brand new LP spudnuk'l bolt, maddman rocket valve, polished striker, OTP multi bore barrel kit, maddman spring kit, Stock regulator all in excellent condition,zenitram straight trigger..
4. Changed the switch in the grip frame to a 5 gram switch, Polished the striker, covered the exhaust hole(as on the maddman website) drill out the va..
5. The gun has no scratches i only played with 3 times so far also the gun is currently shooting 400 psi at 290 fps..i probably could go lower with a better reg..don't know much about my effieceincy though don't really worry to much about it because i am using c02 but once i get a bigger nitro tank thats all going to change (got a 48/3000psi that is to small for me)

[godp777]

what happened with this???

[Calebd2]

godp- 210

[schoolsukz08]

1. The marker and its condition (great, good, fair, bad, poor)
2. Marker's age
3. Accessories and their conditions
4. modifications made
5. any comments on scratches, blemishes, etc.

03 Black Dragun LCD

1. Good
2. 8 months
3. AA barrel
4. None
5. One small scratch

[jdp72]

1. Good condition black Pi-E2
2. 2002 model year (I think that is the only year it was out) so it's just over a year old
3. Accessories:
Centerflag Regulator
Shocktech Delrin Bolt
32* high flow valve/pin
Black Magic Cup seal
32* Spring Kit
Shocktech spring shims
Quick Strip screws
I&I Sports Feedtube O-ring adapter
JT 2 piece .689 bore barrel
DOP Bullet Drop w/ on/off ASA
Kapp Gauge
Checkit trigger
4. Modifications:
Bored out holes in the VA (per otter)
Smoothed down hammer (per otter)
New sear (something was messed up with the stock one)
Plus an extra new sear (just in case)
5. No serious blemishes, scratches, scars aware of.

Works flawless at 500 psi input pressure with strong main and weak valve, shooting at 290 fps.

I was thinking of either selling it whole, or parting it out and then putting the stock parts back on the marker and then selling that whole. What do you guys think?

What do you guys think this is worth??? I just have too many markers right now, and I want to add either an A4 or a DM4 soon...and this will help bite into those costs. Thanks.

[darkICE]

black dragun LCD
16" armson stealth barrel

[niczed]

Dragun T.E.S halo b hopper, teardrop 12", anti syphoned co2

[ReaLe[e]LAZY]

THIS SHOULD GET STICKIED:)

I got a 02 compact wit 9vlt hopper, gas thro grip, and a 32 degrees whisperer barrel. Its in good condition, iv had it almost a year.

I wanna no the price wit my 20 oz tank and mask and without them

i no it not much just want a price

[RgMekanic]

Speak in full complete sentances, add punctuations when the right moment arrises, and try clicking the spell check button if you're unsure.

[Zjantzi]

This will be my gun as of February.

3 month old Black/Blue Dragun TES very well kept.

Timmy Aced

All Intimidator Internals

CP Black Grip Reg

CP Swoop Roller-bearing Trigger

CIP Adj. Ram Cap

Intimidator Vaporworks Entropy Board

High Flow Barbs

GZ Clamshell

CP .693 Barrel

PBK Snakeskin BOlt

Bulldog III 45/4500

Kapp Rhino LPR attached to volumizer a la samis13

Viewloader Evlution 2 Z/Board

I have already purchased many of these parts, except for those not yet released. Am looking to see how much money I have wasted :(.
Thanks

I second the sticky idea.

[Calebd2]

Guys, I'm sorry I haven't gotten in here and appraised these. I've been incredibly busy with finals and all. I WILL try to get to these as soon as possible.

Also, if someone else would like to help give some quotes, go right ahead. :)

[NC demolition]

setup in sig..HPA tank is steel and has small scratches. nothing else does. price with barrels and tanks split up please

[evan123]

schoolsukz- 150

jdp-near 210

Darkice-bad description, i need year.

niced-since there 250 new, i would say 270 cause of the halo b

Lazy-120

Zjantzi- wow, sounds almost completely like a timmy, my guess is near 600 with the tank.

[Zjantzi]

It was around 800 to set up, so I didn't lose too much in resale value. Thanks for the quote.

[pballplayer9]

This is the M3 forum. Check out the Spyder appraisal thread. -Caleb

[pballplayer9]

o sry... im a newbie.... is there anyway u can send me all of the stuff i posted before u deleted it though so i can copy and paste it to the spyder thread? sry if it causes trouble but im jw if u could possible do this??? thanks!

[Calebd2]

Originally posted by pballplayer9
o sry... im a newbie.... is there anyway u can send me all of the stuff i posted before u deleted it though so i can copy and paste it to the spyder thread? sry if it causes trouble but im jw if u could possible do this??? thanks!

No, sorry, it's gone bud.

[sk8brder67]

Calebd2 or anyone...

I am interested how much do you think I can get for my marker?

Black Dragun T.E.S.
One Kit
check-it med. drop
check-it asa on/off
check-it powerstation reg.
check-it trigger
Bandit Bolt w/o o-rings
12v Revy X-board

Thanks for your help.

[bunkerhappy]

dragunfly lcd grey great condition 1 month old, 21/2 in lightning drop macro line derlin anti-chop bolt wgp presure spring, no scratches.

[ReaLe[e]LAZY]

I hav a black dragun compact 2k2 and i was wondering, if i took out the venturi and polished the internals, would it increase the value. If so iv posted on here be4 and i have a black dragun 2k2 compact wit gas through bottom line 9vlt hopper and 32 whisperer barrel. Its in ok condition but it has obviously been used.... WHEN R THEY GONNA GET THIS STICKDIED??????

[unknownpsycho]

I just upgraded all my equipment so I'm looking to get rid of my Dragunfire as a setup package (minus the mask). How much is it all worth?

-2003 Dragunfire LCD full function (slight scratches from normal use and scarring from stock aluminum bolt)
-Check-it Sweet Spot trigger
-ThunderPig 14" Tru-Flight QB barrel
-12oz Pure Energy CO2
-VL200 grav hopper
-Viewloader VL Pax Ball Hauler
(includes all stock parts, allen wrenches, barrel plug, manual and hardshell case)

[Omegaboy13]

check my sig

[ThaiZ]

plz apprise mine too
check my sig and the condition is new for all parts never been shot only the tank is 07/02 i bought it on ebay 3 days ago just got it today
beside that it is new
thank you

[OmniBob]

yo alex, if u still got that twisted dragun, keep it. its one out of 12 i think(maybe a couple more or less). not many were made. its funny cause the day m3 got the guns finished, they went and played a tourny with them to advertise them some. any player knows this is a bad idea. the guns craped out on them and they were pissed so they didnt make anymore. so theres a little history for ya. overall the guns r poorly made but all the same a keeper.

[shonie73]

how much for this?

1 1/2 year old M3 Patriot Sniper
Evolution Bolt
Steel Braded Macro
Full Freak (14")
Egg 2 Z board
12 Volt Revy w/ X board
45/3000 crossfire
Blade trigger
Bob Long Torpedo

How much for that with torpedo and without cuz i might keep it if i sell it

[OmniBob]

nice setup, id say 400

[shonie73]

how much if i added my new twisted volumizer and my new system x low pressure chamber?

[OmniBob]

well, twisted volumizers are...crap. and i dunno bout the system x

[darkICE]

2002 black dragun lcd(semi only but w/mousclick trigger pull
16" armson stealth barrel(good condion only used twice)
32 degrees spring kit(brand new)

[OmniBob]

250 cause its tourny legal ad nice barrel.

[ReaLe[e]LAZY]

I hav a black dragun compact 2k2 and i was wondering, if i took out the venturi and polished the internals, would it increase the value. If so iv posted on here be4 and i have a black dragun 2k2 compact wit gas through bottom line 9vlt hopper and 32 whisperer barrel. Oh ya and a custom made drop, about 5. Its in ok condition but it has obviously been used....

[Saint Alfonzo]

Could you please appraise the setup in my sig,
It's less than a month old.

[OmniBob]

ReaLe[e]LAZY: 125

saint alfonso: 450

[pickles8806]

Can you appraise my gun? The gun itself is about three months old, but the stuff on it is practically new. Here it is:
Dragunfly Mech
Shockteck in-line reg
Sure fit adjustable feed neck
Smart Parts 14 inch progressive barrel
WGP Hinge Trigger w/ trigger job
Custom products 2 inch razor drop
Smart Parts on/off smart valve
Kapp 800 psi gauge
Dye stickies

[OmniBob]

350

[OmniBob]

450

[macfights]

ok here goes:

blue/black TES
BL torpedo reg
14" AA barrel
IS switch
Zenitram trigger
Shocktech Timmy bolt
2k2 Timmy feedneck
Hybrid Blunt rail
Hybrid Grind ASA

soon to come: AKA tornado valve, AKA mitey max volumizer

[OmniBob]

balla- 600
macfights- 500, nice setup

[King-Smurf]

i have a dragunfly none mini cocker type body led , with black and clar grips , lady drop with jam bolt , d reg , progissive barrel grey in colour

[OmniBob]

your not american are you?

[King-Smurf]

from canada dude , but i know how to change us founds to canadian

[jrbacon]

Grey Tes (painted grips)
One kit
customised trigger switch
ANS gen-x 2 reg
shocktech drop
32* on/off ASA
Warp feed
spudnukl bolt/ shocktech superfly bolt
j&j ceramic 14, & 16 inch barrels
sp (bought before the lawsuit bs) teardrop 14 inch
dye gauge

[OmniBob]

smurf, i just had a hard time reading wut u typed. written kinda odd. and u spelled color, colour.

jrbacon- 675

[King-Smurf]

can you just look at the pic and say how much it's worth

[OmniBob]

550

[darkICE]

made some changes how much it worht now
2002 black dragun lcd(semi only mousclick trigger pull)
16" armson stealth barrel
bob long torpedo reg(chrome)
12v revvy
psychoballistics bullet dropforward(chrome)
47/3000 aci bulldog nitro tank
all parts in good condition. drop is brand new and so is torpedo reg

[UnionC]

What do you figure this is worth..
Green/Black One, Black Green Evil Pipe Kit
Black Mac Dev 04 Gladiator reg Black CP Razor Drop
Black Kapp ASA on/off
Centerflag 70/4500 Preset HPA w Black/red Dye Rhino Cover
Smoke Halo TSA Backman LCD

http://www3.telus.net/UnionC/Mlna0004Resize.jpg

[nwendling]

how much do you think for this

2003 Dragunfire Full Function LCD
Metal Trigger Frame w/ SEMI-NITRO-MULTI-AUTO
Dead on Drop @ 7 inches
Flush Cocking setup
Spud LP bolt
cip 15 assault block
AIM nickel regulator
polished striker
maddman rocket valve
cip stick trigger
Black tear drop barrel 14 in
no scratches
operating @ 350 psi w/ low recoil and lightest spring I could find

[OmniBob]

dark- 400
union-700 nice setup
nwendling-350

[UnionC]

Thanx man.. I like to put together good stuff.. I'm liking it so far.

[nwendling]

better then I expected......I was thinking like $300.00. I am thinking about putting it on EBAY to help towards the o3

[goalscorer]

This is a limited edition Dragunfly Autococker fade edition, this is a black to red fade. This marker has had many upgrades, it comes with an anti chop bolt, to prevent ball choping and breaking, also come with a Dragunfly beever tail and a regulator. comes wiht the stock barrel and a upgraded smart parts Progressive barrel. comes with a carrying case and instruction manual and spare parts kit with barrel plug. Used only 2 times and in mint condition

what do you think

[PB_Matty]

$260 for the dragunfly

[TESfreak]

dragun tes black to green(had since christmas in almost perfect conditoion)
shochtech supa fly bolt(only used twice)

[shonie73]

220 or 230 for that TES

someone do my drallion i think its the first drallion in the thread

gold to white(or silver) fade drallion
full freak kit
Evolution 2 w/ y board
CP uni mount
CiP Sweet Spot
Dragun D-reg
CP lightning drop
macroline kit
shocktech spring kit
clear dye stickies
orracle bolt
Dragun drop w/ asa


some of this isnt in my sig cuz im gettin it on this friday but still i already know im gettin it so i dont care

[ReaLe[e]LAZY]

Hey iv been hearing an ask for an appraisal every now and again so UP.... and sticky...

Also, all tes parts, except the body in a 2k2 dragun compact milled for top cocking... It will have Tes frame & Board, tes stock reg, valve, asa, bolt, spring, front block, everything from a stock tes on a 2k2 dragun compact body.
w/ 9vlt hopper and anti-syphoned 20oz tank.

So here it is in fewer words...
2k2 milled top cocking dragun compact
stock tes parts
9vlt hopper
anti-syphoned 20oz co2

I was thinking about $180ish.

[mry7]

Red to black TES 1 month old
Great condition
all parts are brand new
Bob long torpedo reg (black)
Red macroline kit
Dead On Pro Blade with On/Off Drop Forward - Black
12v revvy w/ xboard
Dye Ultralight (black back, red front) 14 inch
check it spring kit
68 /4500 crossfire tank
spudnkly bolt (cant spell)
and gettin acp slasher as soon as thier available

[ReaLe[e]LAZY]

UP....
Nebody?

[schoolsukz08]

ReaLe[e]LAZY - No way your getting 280 for that, I'm thinkin more like 180-200, depends on the milling job.

mry7 - Nice set up, if you sold separate you'd get a lot of cash, but I say around 350-400 is reasonable since its pretty much new.

[504p8ntbalfreak]

OK try this one:

Black Dragun LCD
custom anodized clear to orange fade.
Matched full CP barrel kit
matched Dye low rise w/ black CiP feed adapter
CiP Stick trigger
M92 gripframe anodized to match
Tournament board
Bloencustoms hand milled valve and valve pin
Shocktech springs kit
Shocktech bolt kit with the snap back
custom bored asa
AA messiah reg


gun operates at 220psi and chronos at ~285fps



got pictures if you want.... how much you think?

[schoolsukz08]

504p8ntbalfreak - Wow that would get a pretty penny. But I think it would be around 320-370ish. Post some pictures in the pictures thread I'm curious to see it.

[ReaLe[e]LAZY]

Originally posted by schoolsukz08
ReaLe[e]LAZY - No way your getting 280 for that, I'm thinkin more like 180-200, depends on the milling job.

mry7 - Nice set up, if you sold separate you'd get a lot of cash, but I say around 350-400 is reasonable since its pretty much new.

Sry i meant $180 my bad. Lol if i got 280 for that i would ripe som1 off so bad lmao.

[504p8ntbalfreak]

Originally posted by alexrusek
ok its a "twisted dragon" any history and an aprasiall is apreciated


http://www.pbnationmagazine.com/data/72/10659689831factory.jpg


"twisted dragun"
year old(maybe?)
no blemishes

LCD Frame--BLue Light
Twisted LPC*not pictured*
BL Torp
High Flow Valve
Delrin Bolt
Twisted PB Body
Custom Anno
Fugly Lapco Drop
SS
2 piece stock barrel(what is it?)(2 piece--threads on both ends are spyder)*picutred*
14" AA Barrel*not pictured*
macroline
Brand New Zenitram Blade Trigger*Not picutred*
2 guages
high flow VA


Hahahaha.... I know all about this gun....
This was a gun that was sent off to Bloencustoms in New Orleans in mid 2k2 or early 2k3... It was one of 7 prototype bodies milled for M3. The guys at M3 wanted a crazy look that no one else had seen before. So we decide to make the gun look like it had been frozen up with CO2. The whole gun was Beadblasted and then I polished o the backend of it for probably 10-15 hours. Now, the ano was meant to look like the gun had frozen during play, hence the silver matte in the front and the polished blue in the rear.
When I did that gun it had a matching barrel. do you have it too? Sorry to get to this so late but I just found the post and saw the picture..
I don't know how much you paid, but never sell it because its the ONLY one like it in the world. It is however one of seven of the first milling prototypes. No appraisal because there is nothing to compare it too...

Thanks,
504p8ntbalfreak

P.S. That gun was first used by the Dragun Factory team in tourneys. I believe the last one it was used in was the Philly tourney of 2k2

[504p8ntbalfreak]

Originally posted by schoolsukz08
504p8ntbalfreak - Wow that would get a pretty penny. But I think it would be around 320-370ish. Post some pictures in the pictures thread I'm curious to see it.

Thats a pretty good guess... I sold it to a friend cheap for 300. And I will try to post some pictures... Thanks for the info...

504p8ntbalfreak

[p41ntballjunkie]

umm new t.e.s. only used around 10 times...less than 5 cases through it.....cleaned every time its been used...no paint coming off bolt is good no scrtches no dents so pretty much brand new still has case

[p41ntballjunkie]

plus the revy...and yeah UP need an answer

[schoolsukz08]

p41ntballjunkie - I'd say 200-230.

[lazybum550]

red to black dragun tes w/case good condition
1 year old played about 4 times
Check it unimount (red with black cage) fair condition
angel mini reg (k krome finish)
check no rise sure fit feed neck

[NC demolition]

Black Dragun Compact, two years old in Auguest. Psycho ballistics bullet drop forward (no-bleed style), polished internals, 14" J&J ceramic, Halo TSA frontman LED, Black Magic regulator, and a CiP dragun curved trigger
and on the way (would be here before sale)
The One kit, eyes,slasher trigger, and custom made frame

[schoolsukz08]

lazybum550 - 190-220 but the only thing I'm unsure of is the angel mini reg.

NC demolition - 120-140 By the way this is before the one kit, eyes and frame. Cause you can't predict the quality of the fade and the frame.

[MKA14269]

1 yr old mech dragunfly
wgp hinge
xcel barrel
dead-on pro style drop
delron anti-chop bolt

[schoolsukz08]

MKA14269 - 170-190ish

[sureshot30]

I have a four month old mint conditon Dragun TES with the following upgrades:
dragun tes w/TES Spudnukl nylatron low pressure bolt w/CIP Timmy Clamping Feed Neck w/Zenitram flat aluminum trigger w/Bob Long 0-1200 psi gauge running anti-siphoned co2w/ a 12volt revvy with a 6 prong vortex impeller and a 16 inch cmi thunder pig barrel

no sratches or dings.

[schoolsukz08]

sureshot30 - 160-190

[eak75]

black tes, good condition, 50g is switch, dye ultralite barrel,32 degree valve, scratches on trigger frame from knocking out the trigger pin other than that no scratches, and no eye wire but still has the board.

[schoolsukz08]

eak75 - 150-170

[wicked_one_26]

red/black tes like brand new-no scratches or blemishes
4 months old
black cp reg.
spudnuk'l bolt
benchmark dove tail
12 in all american barrel
50 gram trigger switch

Edit: Dead on drop forward with on\off
14in. all amercain tip with freak back
macroline kit

[NC demolition]

wicked, i'd say 180 give or take a few bucks, but i'm not too knowledgable on tessy resale value.

[TESballer]

yea $180 sounds good but with the right person you could get a lot more

[wicked_one_26]

sounds pretty good to me, i had an offer of $210, but that included my 12v revvy.

I cant part w/my baby......:D

[Dragun_T.E.S._5]

1. Dragun T.E.S. great condition.
2. Five months about 5000 to 6000 shots.
3. CP 1 piece classic 14''.
4. None.
5. Feed neck scratched severely.

[PimpedJT3.5]

I'd pay about 150...

[jlinkz7]

what about for a

tes black/blue 1 month old barley used no scraches or anything
bl torpdeo reg chrome new
system x drop new
macro line new
teardrop barrel 14 chrome new
68/4500 bulldog 3 tank new
halo b hopper black new
3a paintball tank cover new in blue
sure feed hopper neck new
superfly bolt new
hard case that came with the gun

[PimpedJT3.5]

Nice setup! I'd pay anywhere from 300-400! You'd get more parting out the tank and loader though!

[scot_stuf]

03 t.e.s. great condition bought between dec 03 and feb 04 cant remember no acc just sent to dragun under warrenty for new reg asa positioned for nitro no scratches used 4 full day trips

[wicked_one_26]

Just wondering if its worth more now with the ups I just did.


Originally posted by wicked_one_26
red/black tes like brand new-no scratches or blemishes
4 months old
black cp reg.
spudnuk'l bolt
benchmark dove tail
12 in all american barrel
50 gram trigger switch

Edit: Dead on drop forward with on\off
14in. all amercain tip with freak back
macroline kit

I also rubber coated the grips red.

[schultzay]

how about the gun in my signature
its 2 months old and has a couple minor scratches near the bolt

[schoolsukz08]

wicked_one_26 - Add about 15 bucks so that comes to 195ish

schultzay - 190-215 and that is if it includes the tank and hopper.

[volcomboi]

Brand New blue/black dragun the one
Brand New Halo b with victory board and rip
Brand New Knockout 10 piece barell kit
Brand New Bandit nylon bolt
Brand New AKA Sidewinder regulator
Brand New Knockout 5.5 inch drop forward with on/off
Brand New Zenitram trigger
Brand New 50 gram trigger switch
Brand New Twisting neck feed

[tippMANntech]

Dragun E-2 LCD

cp barrel

good condition with a few sticers on it


all black with silver drop

[cyprus223]

how about a 2 year old piranha sts with a subzero 4 sstage expansion chamber

[schoolsukz08]

cyprus223 this is for Draguns only.

[cyprus223]

i just asked cause im selling my piranha sts and buying a black dragun lol my bad i just posted it because i wanted to see what it was worth and i wasnt thinking about the draguns only forum sorry.

[tippMANntech]

Dragun E-2 LCD

cp barrel

good condition with a few stickers on it


all black with silver drop

i think those are all stock items though


__________________

[SpyderMan279]

What about a black to blue fade 2003 TES with a 14" CP .693 barrel and a VL 12V. revolution In perfect cond? And I custom painted my grips Black..it looks sic.

[scot_stuf]

ok here is what im aiming for tell me what u think

blue/black fade t.e.s, 3 insert scepter kit, shocktect delerin bolt, CIP feedneck, evo II, evil detonator reg, and some drop

[kevin123]

dragun t.es
physco ballitcs on/off drop forward
air america viglante regulator
smart parts progressive barrel
execllent conditon

[cyprus223]

ok ordered my gun and the parts for it i ordered a e-2 black dragun a psycho ballistics drop forward, slasher trigger (replace plastic ones , dont like em), aci 6 stage expansion chamber, and in 2 weeks il have 300 dollars for a good bolt and a hopper and if anyone could give me ideas on a knew hopper that would be cool

plus i got a 14 inche all american barrel that fits the spyder threads on my piranha and il use that on my black dragun

[cyprus223]

also info on whats the best bolt just replie my thread

[pballplayer9]

hey ive gotta Dragun TES that is highly uped...

It is in great condition

I've had it since Christmas



50 g switch
on/off asa
small shocktech drop
evil driver barrel
one kit
APM tigershark bolt
longer stainless steel macroline
zenitram trigger
special 30 bps kit that includes:
Palmers micro rock
qev
90* Hi-Flo Fitting
1/8 Air line
and a Modified LPC Plug...
(and of course all stock parts that had been replaced)
**all in great condition

Mods: Trigger Adjustment

Not really any scratches..

altogether... ive put $445 dollars just on upgrades....
so the gun is worth around 615...
how much do u think i could for this is if i parted out and if i sold it all together??????

** I also have a Palmers Reg. and an Egg 2 but im not sure if id want to sell those wit the gun and ups...

thanx!

[Thirty32Two]

how much would a black to red fade dragunfly mech with a wgp hinge trigger go for?

[pballplayer9]

is anyone gonna reply to mine???

(The TES above the one above this....)

[schoolsukz08]

tippMANntech - 75

SpyderMan279 - 130

scot_stuf - 160

kevin123 - 170

pballplayer9 - 255

Thirty32Two - 150

Okay guys this is getting really unorganized. Remember this is for people looking to sell their guns. I won't appraise it from now on unless you use this format.

1. Model type
2. Age
3. Condition
4. Upgrades

[Aero277]

Dragun T.E.S

1. Great Condition
2. Give or take a few months
3. Straight Shot Squeegee, 2 Redz lanyards, Redz barrel condom, Redz neck gaurd, JTUSA 4 pod slampack(I Think), 4 PMI clear 140 round pods, JTUSA Alpha mask w/bag, JTUSA half finger gloves, 47 IN 3000 PSI Nitro Tank, Empire Reloader.
4. No Mods
5. None

My brother sent it to him so he can sell it as a package on Ebay, so I'm wondering what a starting price or Buy It Now or reserve would be, Thanks alot.

[wakeupandbord]

1. Good condition, NEVER used stock bolt only delrin (NO scratches in body) Only the 2 small scratches on the trigger frame, thats why it's in good condition not great.

2.AGE- The body itself is about 2 months old because I just got a new body from dragun empire because the old one had defects. All the upgrades are 7 months and under in age.

3. Ricochet Hopper, Ultralight barrel, Both In Perfect Condition

4. All upgrades are in perfect condition!
Dragun Empire TES Red- $300.00
Dye Ultralight Barrel 16in- $90.00
Check It Products Clamping Feed Neck $34.95
Shocktech Supa-Fly Bolt $68.89
APM Products Nylatron Bolt $20.00
Air America Messiah Regulator $80.99
Shocktech Low Pressure Chamber $12.99
Macro Line Kit and Fittings $13.99
Physco Ballistics Drop Forward & gauge $32.99
Ricochet 2k Apache Electronic Hopper $99.95
Spring Kit $12.89

TOTAL $767.64


One scratch on the trigger guard from OGI's sh***ty shipping and another small one above that on the trigger frame near the trigger pin.

This gun will be going on ebay soon to make money for a 04 LCD DYE Matrix. It will be under the seller paintballmasta69

ESTIMATE PLEASE!!!!!!

[wakeupandbord]

this is for Aero, I say a good reserve is $220 or $250, but im prolly wrong.

[stiffler]

ok how about
-brand new dragun T1 silver gold fade
-dragun T1 LPR adaptor
-micro rock LPR
-Eclipse QEV
-BL Torpedo Reg
-Check-it speedy drop
-macro line
-evil pipe
-68/4500 Pure Energy
-Dye rhino tank cover
-Evil bolt
-Egg II w/z board
-OGI clamping feed neck
-50g switch
-Zenitram trigger

[wakeboardZ]

wut is this worth dragonfly w/cp drop and on/offand a egg

[shonie73]

how much is my 3 month old 2k4 drallion with cp lightning drop, CiP unimount, all american with freak tip, d reg, and macroline kit worth?

many upgrades coming soon, i will b back

o ya and wake, is ur fly mech or lcd?

[electronix]

how much are these worth


dragun e2
bladed stock trigegr
trigger pull modded to the weight of 20 grams


dragun THE ONE
bandit bolt
all modes unlocked
screw tight clamping feedneck
QEV

[electronix]

pm me about that this is not the place


how much are these worth


dragun e2
bladed stock trigegr
trigger pull modded to the weight of 20 grams


dragun THE ONE
bandit bolt
all modes unlocked
screw tight clamping feedneck
QEV

[lightyaup]

Dragunfly Mech Looks Like New No marks at all. Only a couple months old. Comes with the stock reg/ASA (not interested in appraising my ups). Barely used, probably 7-10 times. Prolly 3 bags shot thru the marker at most.
Comments: The marker comes in a custom black to orange fade, this is very difficult to find now in fact i cant find a single place to find it other then the store i bought it at. The trigger pull is also quite a bit lighter then a stock mech trigger

[wakeupandbord]

1. Good condition, NEVER used stock bolt only delrin (NO scratches in body) Only the 2 small scratches on the trigger frame, thats why it's in good condition not great.

2.AGE- The body itself is about 2 months old because I just got a new body from dragun empire because the old one had defects. All the upgrades are 7 months and under in age.

3. Ricochet Hopper, Ultralight barrel, Both In Perfect Condition

4. All upgrades are in perfect condition!
Dragun Empire TES Red- $300.00
Dye Ultralight Barrel 16in- $90.00
Check It Products Clamping Feed Neck $34.95
Shocktech Supa-Fly Bolt $68.89
APM Products Nylatron Bolt $20.00
Air America Messiah Regulator $80.99
Shocktech Low Pressure Chamber $12.99
Macro Line Kit and Fittings $13.99
Physco Ballistics Drop Forward & gauge $32.99
Ricochet 2k Apache Electronic Hopper $99.95
Spring Kit $12.89

TOTAL $767.64 :D


5. Scratches- One scratch on the trigger guard from OGI's sh***ty shipping and another small one above that on the trigger frame near the trigger pin.

This gun will be going on ebay soon to make money for a 04 LCD DYE Matrix. It will be under the seller paintballmasta69

Pictures of my gun Here (http://www.*******s.com/teamdarkthunder/mygun.htm)

Please ESTIMATE this!!!!!! THANKS :|

[pierc]

id have to say about $550-$650 and you should take off those stickers because they are :tdown:

[wakeupandbord]

Yea, thaks for being the first person to give me an estimate and I was kinda planning on taking the stickers off anyway.

[wakeupandbord]

Originally posted by stiffler
ok how about
-brand new dragun T1 silver gold fade
-dragun T1 LPR adaptor
-micro rock LPR
-Eclipse QEV
-BL Torpedo Reg
-Check-it speedy drop
-macro line
-evil pipe
-68/4500 Pure Energy
-Dye rhino tank cover
-Evil bolt
-Egg II w/z board
-OGI clamping feed neck
-50g switch
-Zenitram trigger

About........... $680-$550

[davidthegr8]

1. The marker and its condition (great, good, fair, bad, poor)
2. Marker's age
3. Accessories and their conditions
4. modifications made
5. any comments on scratches, blemishes, etc.


1. Dragun T.E.S.- Good condition
2. 2 years old
3. 14" SP Progressive Barell, 48 ci Pure Energy HPA, 12v Revvy Chamelon, Jam Bolt.
4. Trigger mod (less trigger pull), Magnets on trigger
5. a few small scratches on the body but dosent affect performance at all.

Can i maybe get a price that this is all worth? KTHX

[pbrascal37]

$200-225 tops with tank and hopper

your marker isn't worth what its worth if you know what I mean

and you have almost no ups into it and you tank=50$ and your hopper and barrel=40$

there you go

[davidthegr8]

ok... so i need more ups... i am getting a few for christmas such as new reg, new drop forward, etc.

[pbrascal37]

yeah, also get a clamping feedneck and maybe a new hammer or a better barrel

[Nunekin666]

Dragunfly LCD-great condition
Halfblocked and midgetized
Shockteck ram/palmer QEV/cut down WGP arm
SAW nylatron bolt
custom 90 deg. feedneck
Qloader
T1 board with SD bouncebeam eye
CCI tactical adjustable drop w/0-1500 gauge
AKA sidewinder
PHAT 0-700 post reg gauge
SAW high flow valve and cupseal
high flow porting in front block
3 way adjustable trigger
15 gram microswitch
PHAT pro 9 peice barrel kit
macroline on swivel connecters

So what do you think?

[pbrascal37]

not sure what that would be worth, someone else will but nice fly

are you really a amish paintballer? aren't there rules or something on that?

[jmbishop]

I want to see it

[Nunekin666]

No Im not Amish I just thought that was amusing
As soon as I can I will get pics up

[pballplayer9]

gold/silver dragun t1
Black rubberized grips
zenitram trigger
50 g switch
spudnk'l bolt
palmers stabilizer regulator
twist adj. feedneck
powerlyte scepter barrel kit

all in good condition

what do you think I could get for this?

[pbrascal37]

thats a pretty nice setup

I would say about 250-300 but I may be wrong

[jmbishop]

I'd say a little lower.

[falconfighter]

Can anyone tell me about what a fairly stock drallion costs? I'm interested in buying one, and I'm wondering about the cost.

[insanedayzballa]

1) Black/Green Dragun The One Great condition

2) 1.5 years old

3)Black No Rise Twist lock clamping feed neck, cp unimount freak barrell, all in excelent shape no scratches at all Delron Bolt, bandit bolts

4)The Diode Mode (soon)

5) No scratches at all

[Headshotted]

Dragunfire Compact
TES Triggerframe + Electronics TES REG/Asa Combo, Speedneck, soon to come APM Delrin Bolt and T1 Valve

[DrewDodson89]

Good Condition

M3 W/ Aluminum Trigger frame
Tboard
BreakBeam Eyes
T Switch
Strait (Vert) Alum. Trigger
Chopped for top Cocking
Modified for LP
Stock Barrel
"Desert" Barrel (just bigger bore)
Spring Kit
Case
Mech Frame

Unknown Age I would say about 1-1.5 years though

[Drainomax09]

Dragun The One - black to green fade. Comes with original case.
- 12" Custom Products barrel - black dusted
- 16" Red barrel and stock barrel included
- PMI Regulator - stock regulator included
-12 oz and 9 oz CO2 tank
- 200 rnd view loader hopper
- All original parts - one small scratch on feed neck
- Great condition - good gun - reason for selling--getting out of paintball.

[Paintball=life]

Gray Dragun TES.
Bout 10months old.
GREAT Condition.
Not Really ANY Scratches or Blemishes
Has a custom sleave in the Front Block so No More Blow O-Rings
Spring has been worked on to get better FPS
Has a custom valve stem top on it.
Has a Clamping Feedneck(one that u use an allen wrench to tighten)
Stock barrel
Like an 80g switch. Also comes with a 50g and 250g switch.
Extra Clear Grip Panels.


Link in Sig. has pics of it.

[p8ntballtwin]

to let you all know..i had a dragun t1 black/blue fade with a derlin bolt, boblong torpedo reg and another barrel...and i was glad to get 210 for it. although it choped like a b****. and now i have a bob long defiant...its dominate

[DrewDodson89]

to let you all know..i had a dragun t1 black/blue fade with a derlin bolt, boblong torpedo reg and another barrel...and i was glad to get 210 for it. although it choped like a b****. and now i have a bob long defiant...its dominate

and?

[Nugget359]

1. Black Dragunfire Marker in good condition.
2. About a year old.
3. 16" barrel, kind of scratched but works like a champ.
4. No major modifications, I added a bottomline + expansion, but the bottom ASA has staggered screw holes instead of straight ones, so there is only one screw holding it together. It still works perfect though.
5. Very Minor Blemishes on the expansion chamber and barrel.

[pballplayer9]

Dragun The One Gold/Silver
Zenitram Trigger
Palmers Stabalizer
Powerlyte Scepter Barrel Kit
Adj. Twist Feedneck
Smart Parts Rail
Phat On/off ASA
Quick Disconnects at the Reg and the asa
Steel Hosing
Black Rubberized Grips
Good condition

[SnakePlaya05]

275-300 maybe^^^

mine, about a 1/2 year old, no scrathes

green /black t1
w/ Smart parts proggresive barrel
Upgraded DYE Hybrid Regulator
Psychoballistic Drop Forward w/ On - Off
Shocktech Delrin Bolt
CCM Adjustable Feedneck