Rat jr questions [Archive] - Paintball Forums

kake

10-07-2003, 03:46 PM

ok i got a 2nd year college pack and i cant get the vilosity up i have a lpr and a evil valve + is the voodoo bolt supposed to slip out or be a tight fit? and isnt it supposed to have a steel hammer and not brass? i did search but i cant find the one i got any more.

cactushugger

10-08-2003, 07:21 PM

ur bolt should be able to slide right out if you pull out the pin and tilt your gun upwards so the barrel is facing up. If thats not the problem then screw around with the dwell to see if the velocity increases. If not try increasing pressure on ur max-flo or your LPR. If it still doesn't work then its beyond me.:sleep:

xLiLHockeyFreak

10-08-2003, 08:38 PM

What's your dwell, Max Flow psi, and LPR psi (if you know) at?

kake

10-09-2003, 05:05 PM

ok my bolt is a tight fit it doesnt just slip out. the dwell is at about 9 beeps(not positive though maybe a little more) and my max flo is at 160- 180. I have no idea what my lpr is at but i did spen some time at the chrono and it didnt seem to help. im going to get a mini gauge this weekend and im going to the local field.

kake

10-10-2003, 10:40 AM

ok i fixed the problem with the bolt . there was a small burr from nthe pull pin hitting the front of the opening on the top but i file it down and the bolt slips right out!!:)

cactushugger

10-11-2003, 05:25 PM

have you shot ur gun yet?

kake

10-12-2003, 06:46 PM

i went today and the prob is solved but my consistansy is prtty bad +/- 10:( and my air eficiency is bad tto but i still have to fine tune