Trigger set screws

[jaretkelly]

I was wondering if people could post pics of where in the trigger frame they have set screws.

[zenmaster]

no pics, but for the most part, all frames are drilled out identically, depending on the trigger plate style.
Early model frames actually can make use out of the rear stop, which is through the frame behind the trigger return spring, and there are two vertical screws, the fwd one is usually just visible behind the trigger, and the other is in the frame.
later model frame can have a fwd trigger stop, in the top of the frame, behind the front grip frame screw's hole

[jaretkelly]

I have a brand new black magic if that helps.

[zenmaster]

so you're going to drill them out yourself, then? you could send the frame into an airsmith and have them do it... most reputable companies should know what they're doing ^_^

oh, wait... check this out:
http://g3pb.com/faq_cocker_trigger.html

some pics of where the set screws are located...

[pr0kch0p]

you can order a trigger shoe with trigger stops for $20 from PPS, www.palmerpursuit.com for more info, its called the STOP btw. i read about it in a magazine, i forget which one.

[jaretkelly]

yeah I would drill and do it myself I work in a machine shop so it wouldn't be a problem.
Yeah I seen that trigger stop from palmer but not really what I am looking for.

[woods]

.