avenger problem. HELP?

[spyderman132435]

my avenger is not recocking. it seems like the sear is not catching the bolt and it is making that sound when you run out of co2. want should i do and how do i fix it?

[Calebd2]

Strip it and see what's going on inside of the gun.

[paintballer42o]

that and check everything. O-rings, nicks on your bolt, replace spring and stuff.

[chaostheory]

my brother used to have the same gun and the same problem. the way i fixed the gun was by going through and replacing all the o-rings with fresh ones. Most of the o-rings in this gun are tank o-ring compatible. I am not guaranteeing
that this will work though, in fact i think i just got lucky.

[avenger MAN]

no worries the worst that will happen is that you can buy a rebuild kit from like www.888paintball.com there only like 15 buks

[pbpi]

my friends had the same problem... i believe that the springs may be too hard from the factory but i'm not sure...........so if you buy the rebuild kit you may want to try to loosen the old spring to see if that will solve it at all.........

[avenger MAN]

is your velocity high?

[ace6160]

What you need to do is change the o-ring on your tank, and on your bolt. What's happening is that your gun isn't getting enough pressure to recock it.