PDA

View Full Version : Nitro miracle

superben
11-07-2003, 05:38 AM
OK, I dont know how many people know this, maybe a lto maybe a little

But Here is how to increase your nitro efficiency on a BKO by %50-%100. This means that you can get 1.5-2 times the shots out of your nitro i.e.:

A 47/3000 tank will give you almost a thousand shots with the upgrades.

All you need to do is buy one item out of each category

1. Tornado valve, AKA
Vapor Valve, Vaporworks

2. Palmer Stabilizer, Palmer
BL Torpedo regulator, Bob Long
Sidewinder Regulator, AKA
CP Regulator, Custom Products

3. Mitey Max

Now this will probobly cost you about $120 depending on what you get, but i believe if you either have a small Nitro, and some extra money, or If there are no fill stations near you (Like me :() that you get this... because twice your shots is nothing to laugh at.
ayzian
11-07-2003, 12:01 PM
Yes we all knew that... or at least I did... :-)

I've known that for as long as AKA came out with the Mitey Maxes hehe.

Glad you've found out too.
ImpYa
11-07-2003, 04:44 PM
Thats what they are advertised to do bro.

ImpYa
superben
11-07-2003, 06:59 PM
yeah but i think itll help those people new to icd..:goody:
sportmaned
11-07-2003, 09:56 PM
ya i live real close to zenitram, and two days ago i bought a lpr micro rock and a 2k4 glad reg all i need is a mitey max and a vapor valve and i should have a hell of a sweet setup but i prefered with going with the hpr and lpr setup before the volumizer and the valve just my opionion that i think its a little more important for consistancy before efficiency
woolf
11-08-2003, 05:06 AM
aww unluckey me i can get a mitey max
CaptainFuzzy
11-11-2003, 07:18 PM
but are mitey max's necessarily the only volumizer to get?
Trigger Boy
11-12-2003, 04:37 PM
well if you get only 1 and 2 how much will that increse it:confused:
Trigger Boy
11-13-2003, 02:10 PM
oops my bad i meant 1 and 3 nad since I dont quite know to much about bko's were does th mitey max go
CaptainFuzzy
11-13-2003, 06:58 PM
A mitey max is just a volumizer. It screws into where your currently existing valve endcap goes. They simply allow for more air to be held so you don't necessairly need a MM... just a larger volumizer.
ImpYa
11-14-2003, 11:31 AM
The MM also puts your pressure on the valve than the stock cap and spring.

ImpYa
Model98
11-14-2003, 03:11 PM
Well...I have 2 out of the 3 items listed...all I need is a Vapor Valve :D
Orangecola87
11-16-2003, 02:11 PM
From my 68/3000 I get EXACTTTTLY 1114 shots.. Yes, one time I filled my tank up, and counted every single shot.
ImpYa
11-16-2003, 02:27 PM
Originally posted by Orangecola87
From my 68/3000 I get EXACTTTTLY 1114 shots.. Yes, one time I filled my tank up, and counted every single shot.

Was that with paint? If not, then you will get around 1250 easy.

ImpYa
Orangecola87
11-16-2003, 02:59 PM
It was without paint... It was also around 300 fps. Not sure of the output pressure... But I think when peoople say how many shots they get.. they always overguess. My friend was like, "I wish I could get 1600 shots off my tank" referring to mine....
superben
11-18-2003, 12:59 PM
was this with mods or without, if its without then you should get at least 1500 easy
Orangecola87
11-19-2003, 06:55 PM
All I had was a vapor valve at that time.. May of had the bolt, im not sure..