PDA

View Full Version : Expansion Chamber for TL+


Hellbily13
09-23-2001, 06:10 PM
I wanted to know if the mini expansion champer that comes stock on a tl+ sucks compared to buying a new x chamber?

What is the best x chamber for my gun for around $50?

Saiyan_warrior
09-23-2001, 06:20 PM
From what I've heard that the mini x chamber that comes stock on the tl plus and other markers just plain sucks.

I would skip getting an x chamber and getting a regulator. I would suggest buying a WGP reg from an autococker owner for 15-20 bucks and you'd be better off with it.

Hellbily13
09-23-2001, 06:30 PM
I know there is a difference but what specificly does a regulator do that the x chamber doesnt?

Saiyan_warrior
09-23-2001, 06:41 PM
A regulator regulates the ingoing pressure into your marker. Wont have as much velocity spikes and your marker will be more consistant. Also if you want to make your gun lp you HAVE to have a regulator to Adjust the pressure.

BlindSeaman
09-23-2001, 07:16 PM
For the most part it also keeps liquid c02 out of the gun better than an expansion chamber.

Hellbily13
09-23-2001, 08:42 PM
Do X-chambers and Regulators quiet a gun down at all?

BlindSeaman
09-23-2001, 08:58 PM
If the pressure is turned down it can.

Avatar
09-23-2001, 09:11 PM
dumb question, i dont know where the wgp regulator goes, at least not in this state of mind anyways, so tell me could i use it with my remote?

BlindSeaman
09-23-2001, 09:15 PM
I beleive you could, It goes goes in your V/A. So if you ran the macro to a bottom line then hooked up the remote to the bottom line it should work.