Gauge upgrade!

[ambush360]

I just got my new 01k vert. feed cocker and oh my, is it great, but anyways on the bottom of the front block i noticed a bolt with an allen wrench fitting and was wondering if I would be able to fit a 90* elbow on it and then put a guage off that. Or i also read about drilling a hole and tapping it through the side of the front block. Any suggestions???

Thanks a ton
Keith.

[ptflyer]

yep...just take out the allen plug in the bottom of your front block and scew in an elbow and put a guage on it....


Or get a mini guage....888paintball has them on sale 14.88 for the 32* they come 0-600....or 0-1200 (I think).....and that is small enough to screw it directly into your front block....(thats what I did)...the guage will face down and is less likely to get hit under your block and if it does just the side gets hit...

[Aberle]

I don't recommend drill & tap, just unscrew the allen screw. There are several small gauges available for $20.00 plus/minus. Many have threads on the back so you won't even need an elbow. Check out the 'cocker teardowm/rebuild artical link on http://www.pbreview.com/661/1/0/. It has a guage like you're wanting...... good luck & good hunting!