PDA

View Full Version : Adjusting Trigger

OmenMan
11-27-2003, 12:29 PM
Crazy to say but my trigger pull is to light:) . I want to know how to adjust the trigger beacuse its not in the manual or in the FAQ's.
ShadowWalker
11-29-2003, 11:06 AM
there are 2 screws on the trigger...play with them until you like it.
OmenMan
12-01-2003, 05:57 AM
yea but what do I do with the two screws
:confused:
Sherlok
12-01-2003, 10:36 AM
screw them. One controls the forward play, the other the back play.....

if you think the trigger is too light tho, u may want to experiment with different springs. Which I know nothing about.
ShadowWalker
12-01-2003, 01:31 PM
yeah if anyone knows how to mess with the springs post it here. i'm also interested in it. thats the only thing i dunno about the omen.
OmenMan
12-02-2003, 08:04 AM
What do you mean by forward play and back play???? sorry I know nothing about trigger play. I put in a .05 allen wrench and nothing happens theres no differnce. I screwed it both clock and counter.
Sherlok
12-02-2003, 08:08 AM
Trigegr play is how much extra nmovement there is on the trigger before and after the switch is hit.

The screws just push on part of the frame, really it's best jsut to leave them where they were, the triggers light enough already.
ShadowWalker
12-02-2003, 01:25 PM
i wish they would have maybe put a stiffer spring in. anyone know where to find one that'll fit?
Sherlok
12-02-2003, 04:37 PM
hardware store.......buy a bunch for a few cents, and try 'em out
ShadowWalker
12-02-2003, 04:46 PM
ok cool, i just won an omen on ebay. so as soon as it comes i'll be playing around with the springs.
radishboy
12-03-2003, 08:06 AM
the one higher up just screws in or out to determine when it hits the microswitch (pre play). the bottom one screws in or out to determine when the screw hits the frame, the further in it is, the less pre travel your going to have. how can it be too light?
OmenMan
12-03-2003, 10:57 AM
when I try to walk it it hit it 2 heavy with both fingers so it goes slow and I cant walk it fast. So I want to make the trigger not as light so my finger has more time to lift while the other comes down.
radishboy
12-04-2003, 04:50 AM
no. you want to bring out the pre pull screw just a tad so that it has more time to release from the microswitch, right now its not coming off al the way.
Xtremely Evil
12-05-2003, 09:14 PM
WTF? Mine only came wit 1 screw in the trigger.:pissed:
ShadowWalker
12-06-2003, 07:36 AM
do you see the top hole on the trigger? way up in there, there is a screw.
OmenMan
12-06-2003, 08:50 AM
What do I do with this screw??????
ShadowWalker
12-06-2003, 10:21 AM
turn it. but i can't find the right hex wrench to do it.
radishboy
12-07-2003, 02:01 PM
the one on top should be the smallest wrench it came with (same one as the recock pressure). id not, i don't know what to tell you.
ShadowWalker
12-07-2003, 03:42 PM
radish i need to talk to you about my omen, when are you un grounded?
radishboy
12-07-2003, 05:55 PM
i can use pbr. thats about it. just send me a PM.
OmenMan
12-09-2003, 06:48 PM
also of the post but where the heclk can I find a PDP chip
ShadowWalker
12-09-2003, 07:13 PM
the pdp site. its around these boards somewhere.
radishboy
12-10-2003, 04:59 AM
www.pdpaintball.com
ShadowWalker
12-10-2003, 01:34 PM
radish, you're my go to guy for anything i dunno about omens, lol.
radishboy
12-10-2003, 01:53 PM
thats what im here for. :D
ShadowWalker
12-10-2003, 02:38 PM
i see your sig says you got the chip. do you like it?
radishboy
12-10-2003, 04:36 PM
indeed i do. :D
OmenMan
12-15-2003, 10:48 AM
On the new trigger, how is the trigger pull compared to the original trigger pull.
ShadowWalker
12-15-2003, 02:21 PM
i've shot both, they are pretty much the same. i like the way the black trigger looks though, doesn't stick out.