Need your cocker milled?

[CHRIS]

I am doing milling on cocker body's for a while. I can also polish all finished mill work or raw body's to a mirror shine.
I can do slots, fishbones, holes, take off anything ect.My cnc machine is down so i can not do flames, circles, round milling.
Prices are from $20 to $100 depending on time.

Here is a pic of my gun I milled. It was just a raw body from WGP.
I took off site rails, did close grouped slots on bottom tube, deep slots on the top tube to show bolt action, and I polished it out.

[paintballer56]

ill get back to you, do you do other guns besides cockers, cause my frirend gots a piranha,

[CHRIS]

I know the cocker body inside and out. If you have a spyder well if you know what you want I can do it.

[hydronium]

How much would you charge for the milling job in the picture? How much would the bottom tube slots or top tube slots showing the bolt be (if done separate)? Is polishing extra? Very nice milling job in the picture.

[Byte]

Well I was interested but it seems my post arent welcomed here anymore. My posts get deleted with no indication or warning. Im not having it anymore.

[CHRIS]

Hay byte i am not doing it who knows.If you want you can email me at megadeth51@hotmail.com with anything you have.

Hydro For the bottom tube to be sloted I would charge you $50.For the the same milling I did on mine i would charge $90.That would be bottom tube, site rail,top tube.
Polishing is another story. If i milled your gun I would polish the old site rail and bottom slots for free.I just did a gun were I milled out the black on sides of the bottom tube and on the back part of the top tube so after the millen is done all the milling and tubes are chrome.Really cool looking.(I will do it for free if you get you whole gun milled)

[CHRIS]

Also I can make vertical feed bodys to order.Finshed milled,polished ready to bolt together.I will make no profit off the vert body,just my work. Raw vertical 2001 body's go for $190 from WGP.I live close by them.I will only charge for my work.

[Silent Knight]

chris do you do anno too?

[CHRIS]

Sorry just milling. But www.pkselective.com will and they are here in CA.

[Nautica King]

Chris iam wondering if u can make a vertical cocker the original one , if u can make it look like a blade or black magic ? if so how much ?

[CHRIS]

Vertical to reg no.I can make your cocker come colse to a blade cocker but a black magic is mostly flames and my CNC machine that does drawlings is down.

[WGP*BLACK*MAGIC]

im really impressed with your work. i was wondering if you could mill the top tube like yours to show the bolt action and take of the sight rail i know that for sure. could you do any millling on the vert feed tube? if not its no big deal but if you can i could leave that up to your discretion. do you also get raw asa's too? or not i could buy a poslished one if not. id have to buy a body from you because the only body i have now that doesnt already have milling is the regular r/f 2000 cocker cocker body. how much do you think you would charge to do the above milling on a body that id buy from you and polish it up. how do you do payments and everything on it too. you can email me at bmxboy16@home.com i am really interested and just got paid. i cant stress how good your work looks too!

[Nautica King]

iam wondering for a spyder compact can u mill it and also can u do custom colors ?

[DRAGSTER420]

if i buy a very feed body does that include milling and fnishing?!

[CHRIS]

The body runs for 203 that is with tax. Thats raw.i can polish it and mill it for 80. So around 283 out the door.Front block back block and asa included.

[JDoGG]

that gun looks great. the only thing i dont like is how the body looks with the chrome. if the gun was annoed it would look amazing.

[Nautica King]

CHRIS ! do u do milling on mag's ? !!!! and also do u do paint job's cuz i really want a gun that is colored like the german flag :) like the one in the tippman pics the first one or exactly downward like the german flag

[CHRIS]

I can do milling on all guns but what i have found is that most people just ask.

[MikedaPber]

It would be cool if you could engrave letters and words on the gun. So if you like call it something as a name (lol) you could have it engraved on the gun. hehe. Maybe u can i dunno. Im thinking of calling mine Quiet Riot. B/c its so quiet. And its a riot on the field. Lol.

And im out :peace:

[sajoedawg]

Could you do milling on a normal black 2001 vert. feed cocker???

[CHRIS]

SURE THAT EASY..

[KOTOWA]

can u do the back block overlapping the body? How much would it cost for a fishbone type thing?

[CHRIS]

What do you mean by the back block overlaping.Do you mean going into the body.Like a reverse p block.It would cost you $50 to $80 depending on if i polish it out.

[CHRIS]

If you only wanted just the bones on the top then i would charge you like $40

[flopps1]

hey, chris!

what city are you in! i read that you live close
to wgp. so do i! i have a couple of
buddies that would likely be interested!
i'm bout ten minutes from worr games!
in cerritos. wouldn't mind talking to you
in person and see all that you have to offer.
skip all the writing, if possible!

that's some nice work!

[CHRIS]

That sounds cool to me i am in cypress.My email is megadeth51@hotmail.com I like talken over the phone better.
give me an email and i will reply with my work phone number.

[CHRIS]

.

[KOTOWA]

Chris, can you do ripper? I know I want my cocker milled but I cant decide on what kind of milling. I have my freeflow, which you are keeping your hands away from:D , and my stock vert 2k. Can you also do something like the Proffesional paintball boxxer? Go to professonalpaintball.com, click on freeflow custom, and it shows some bodies, look at the boxxor with the external boxes and stuff. I also may wanna see pix of what you can do. And what about back blox, I really need a good looking cocker to sit next to my freeflow. You can reply or Pm me.

[CHRIS]

If i could do ripper milling then i would do that for a living. That takes a cnc machine to do.I do have one but it is not working. I put a picture of my gun on the first page if you want to look.I will look at the boxxer and get back to you.

[Nautica King]

CHRIS !!! plez respond to my qustion !!!! can u make a gun all chrome then do like blue flame paint job on it ? plez answer both

[CHRIS]

I am only doing milling MR King.I can polish your gun to a chrome finish if your gun is raw and not black.And the flames ,i am a master painter but i dont do paintjobs on guns.Not a good idea i can tell you.Well thats if you want it to come off over time.

[KOTOWA]

Hey, can u do these

1

[KOTOWA]

2

[KOTOWA]

They are both Dye cockers, do u think u can do something like that?

[PBSyndicate]

Where can I buy a DYE Autococker? if anyone knows a few good sites let me know. Thanks.

[KOTOWA]

The above pics are proto types, and are only availible at the world cup. They are gonna retail for 1000 dollars. Im not sure about the specs, but I took the pics when I saw them in florida.

[Exit Woundz]

Are those Minicockers? :eyes:

[Skurge420]

yea minicockers

very nice work on the milling...i might have to get in touch with ya when i get some money

[mrliquidice]

ok chris, i know that your cnc machine is NOT working right now, but if you ever got it working, how much would it be to put the BM flames on a stock 2k1 right feed cocker.

[CHRIS]

I am not getting enough work from just normal milling.I will not even try to get the software runing for a long time.I just do this for fun and money.The software is like $500 bucks so as you see i cant make any money....

[CHRIS]

Ow as for them dye cockers.I wish i could.Not that i couldnt if i could.If i could.................Only if i could........