impulse reg help

[pbmanic]

I just got a stock impulse and the pressure valve that lets the air out if the pressure to high is leaking. its on the bottom of the standard reg, or sticking out of the front of the vff/vert adapter on a vertical reg. I was wondering what its called and where to get a new one.

Also, when i screw the tank in the air leaks out of the hole in the reg-right by where you screw the tank in. am i supposed to get another o-ring for this.

thanks

tyler

[sIc]

Im pretty sure you dont need a new one, though im not to fimiliar with those kind of regs so i cant help you on how to fix it.

The ASA thing yes, just add another o ring.....

[splatmaster210]

I had that problem once, but when I checked to see were the leak was coming from it sounded like it was from the PVR and my VA but it was from the front end cap/Low pressure chamber. It wasent screwed on tight enough so, maby check to see if that is not tightened enough. And if so then screw it tighter;) that might be the prob, good luck -splat

[sIc]

Originally posted by splatmaster210
I had that problem once, but when I checked to see were the leak was coming from it sounded like it was from the PVR and my VA but it was from the front end cap/Low pressure chamber. It wasent screwed on tight enough so, maby check to see if that is not tightened enough. And if so then screw it tighter;) that might be the prob, good luck -splat

He has a horizontal reg.

[splatmaster210]

doh! sorry bro thought you had a vert maxxy.

[pbmanic]

its the little pressure release valve. if you have the vert reg it should be sticking out of your vert adapter or free flow, because there is one on my rat impulse vff. im shure its that part b/c when i stick my finger on it it stops leaking.

tyler

[pbmanic]

ok, all i need now is to know what/where to get the bleeder valve. thanks,
tyler