Imp Kickback Question?

[illmatter]

Hello guys, i have a question about the kickback of my gun.

I am comparing my gun to a Strange Vision imp stock.

My imp:

Strange Bolt
Eclipse Stainless Steel Hammer
NDz Blade Trigger
Jackhammer2 and Tapeworm
Max Flo System 75 / 4500

My gun has a kickback that the Strange doesnt have, is there anything i can change or add to my gun to take away the kickback from the gun... Thanks, any info helps...

[i_luv_strats]

lower your lpr. my lpr is at 60 psi and no kick

[ncpaintballkid]

Originally posted by i_luv_strats
lower your lpr. my lpr is at 60 psi and no kick

dwell and input pressure?

[Kyle's Ghost]

i would higher lpr to like 75 or 80...60 is basically starving the gun...and i would run input at like 120-130...dwell 8 or 9...my gun has no kick with those settings....and shoots perfect.....shots over chrono are 275-280 every shot

[xLiLHockeyFreak]

Ya lowering LPR pressure reduces kick. I have my Evil Resp. at 100, Max Flow at 200, and dwell at 3-4 beeps up. If I lowered my LPR any more, my gun wouldn't function right, since it is supposed to be a high psi lpr.

[i_luv_strats]

Originally posted by ncpaintballkid


dwell and input pressure?

input is 130 and dwell is like....cant remember but not really high

[ncpaintballkid]

I'm guessing you need that little guage on the back of the marker to see the lpr psi right?

[illmatter]

i have the gauge, what im wondering.. could the bolt / hamer combo be the problem?

I have Eclipse Stainless Steel Hammer with the Strange Bolt (small bolt). Ive been told i need to get a heavier/bigger bolt to balance out with the hammer. Toss me some feedback bout this

[xLiLHockeyFreak]

Originally posted by ncpaintballkid
I'm guessing you need that little guage on the back of the marker to see the lpr psi right?

Yup.