help with Piranha STS G2

[PDL_Drummer]

Hey, my Piranha STS G2 came this morning. But I have one little problem. I got it all out and checked everything, but when I hooked up the CO2 I could hear a little air leaking out of the front of the RAM Air Chamber. It's that little hole at the very front of the chamber, I put my finger over it and it stops, is there anyone that knows how to fix this? Thanks
~Ben

[Mr. Kitty]

it is so easy to fix.
just unscrew the chamber and use a small long object to push the insides out from the hole in the front. after the insides push out, you will notice how simple the thing is. it is just a metal piston and a big spring. put a lot of gun oil on the ting o-ring on the piston, then re-install the two pieces at screw the chamber back on. after this 2 minute fix, there will be no leak, so do it.

[MuckRaker]

There is also an o-ring that fits on the lip of the Chamber, just in front of the threads, make sure that o-ring is in place before you screw the chamber back on, if it's a little off, it'll cause gas to blow throught he chamber.

Good luck.

[Skelo]

I had the same problem with my STS G2 and I took it apart and cleaned it, oiled it, and it was all good!