Autococker Stock Trigger Frame?

[Soyboy]

Hey, I want to get a cocker. And I have a few questions...

Should I replace the stock trigger frame and if so what kind should i get?

Should I get a medium bore .688 J&J 2 Piece barrel or small bore .685 J&J 2 piece barrel? I use RPS marbalizers, Rps Premium, Diablo blaze, and Diablo inferno.

I just dont want the bore size to be too small or too big...

Will the stock trigger frame break if i put a kapp dropfoward on it?

[Silent Knight]

one of the most common problems i've seen is the cracking of the stock trigger frame on right feed cockers. Upgrading to a new one would be a wise choice. There are a lot of new trigger frames coming on to the market now, so you have a lot to choose from. among those are either aftermarket sliding triggers or hinge triggers. What frame you want is up to you. I suggest you goto your local field, and ask somone if you can try thier hinge trigger set ups. most people who have bought them really like them, and can get higher ROF by using them, and some are just too used to the sliding action, and go for a good sliding double trigger. Eventually your frame will probably crack, especially under the stress of a heavy drop foward or a large tank. Playing super aggressive and sliding in to bunkers, and just putting the gun through the test will put your frame to the test too.

It sounds like the medium bore J&J would be a good choice for you.

[ry_goody]

You can get sliding triggers for like $50 or hinge for about $100. If your don't have enough money, you can get the sliding trigger. However I would just save another $50 for a hinge grip if you don't have enough money. Hinges are just better, if you don't like the feel of it, then get used to it because once you learn it you will be able to shoot alot faster.

[jpapalsmurfb]

Just a couple of notes from a brand spankin new 2k1 right feed owner...

The stock frame WILL break. I put a drop and a 68 3000 on it and it bends as it is. I imagine it will just snap in half if I jostle it too much.

The trigger stock on the 2001 is nice. I moved from a m98 to the autococker, and the stock autococker beats the ---- out of my double trigger/jobbed m98. I wouldn't worry about the hinge

And-- on a side note, I think you guys should start mentioning that short stroking is nearly impossible on the new stock autocockers because.. well it is. I can't short stroke it if I try.

[Silent Knight]

another satisfied autococker owner... well except for the frame.

[chandlern1]

trigger frame suck mine broke i am going to get a wgp hinge the other ones are to far back ordered right now

[pbgod68cal]

YES GET A NEW FRAME SOON i broke mine in a flag run when i slid and it snaped right on the slot for the rod and coupler and then the next sunday i brok a secound frame in a week so i orderd a new kapp one so defnitly get a frame

[JDoGG]

pbgod, what kind of frame was the second one you broke??

[pbgod68cal]

i broke two stock frames i had to borrow a freinds cuz mi kapp one wasnt in he had an extra frame cuz he put a bench mark on his and i busted his stock frame i broke the first one on a flag run and the second one i'll just say i have a bad temper and i charged a kid after he lit me up after i called miself out and walked off the feild he shot me about 7 times and i sorta spazzed

[chandlern1]

geting lit up sucks what did yo do to the kid man?

[pbgod68cal]

swore at him alot got in his face told him im comin for him next game and then i punhed a tree and just went crazy

[TheSickness]

are tyhe frames the same on standerd feed and vert feed 2k1 cockers. the frame feels al right to me i run a remote so theres not alot of wight on it.

[pbgod68cal]

the only diff in a r/f and a vert wgp cocker is that the r/f ones are plastic and verts are the new carbon compasit .45 frames

[TheSickness]

how are the carbon composite to the plastics

[cockerking69]

Definitely get a new frame soon! i got mine before i broke it. but then pbgod68cal got pissed and broke my stock one.

[chandlern1]

wow i just got my wgp hinge today and man that thing is nice the trigger pull can be made so short i suggest this one its good and not that expensive