silver bullet trigger

[bigfill10708]

wassup i just bought a psychoballistics silver bullet and was wondering how to adjust the trigger pull where it would be extremely light. the trigger is not touching the sensor, meaning that i have a longer trigger pull to make the gun shoot, would anyone know to make the pull shorter, i would appreciate it.

[dethstyl]

sounds like a glitch, mine lays against the switch fine it's just wobbly, you could open up your marker and have a look but that's about the best I can suggest.

[bigfill10708]

yeah i got it figured out. there is a little allen screw that you can adjust your trigger pull with. it was almost against the sensor, but i wanted to make the pull as light as i could. i play front and i need to be really qiuck. if you turn it counterclockwise it makes the pull smaller, but make sure you don't turn it too much or you will go past the pull sensor.

[dethstyl]

which screw is it, the one in front of the trigger guard?

[bigfill10708]

no, you have to take the frame off. it is the screw attached to the top of the trigger. unscrew the bottomline and get it out of the way, the unscrrew the two screws holding the trigger/grip frame on (one in frnt of the trigger gaurd and one behind the grip) then turn the screw on the trigger (very small allen screw) counterclockwise a little. only a hair or it will be too small and will not allow the trigger pull to trip the sensor.

[dethstyl]

o ok, i need to get more tools for my paintball gun, that 32 degrees all-in-one multi-tool looks cool but I need something I can actually buy w/o using the net all the time.

[bigfill10708]

just go to the hardware store and buy a set of standard allen wrnches and a set of metric allen wrenches, the small set and maybe a multi screw driver thing. thats all i have, thats all i need

[bigfill10708]

also, i hope that the trick worked for your trigger, i have mine down as low as the pull will go, you can hit it on the side and it will shoot.