damn gun!!PLEASE HELP!!!!!!!!!!!!!!!!!!!!

[Thor the Mighty]

i got a brand new gun and now that i try to pressurize it, co2 just pours out of the asa adaptor, and no matter what i do (including putting new o rings on), there is nothing i can do to fix it! PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[in trauma]

probally a faulty one what kind of gun is it?

[nick pballer]

Hey if you have lube, such as hoppes 9 or pmi you can put some drops in side the hole in the asa
it should fix the prob's

[ptflyer]

asa's have a lug that depresses the tank pin....some of these lugs are a bit long....and so do not aloow the tank to screw on all the way which will cause a leak.....


that or sometimes it's the tank pin is a little long....

I would try a different tank first....if that doesn't work I would grind down the asa lug a tiny bit at a time until it depresses the pin but the tanks screws all the way in...and the o-ring seals.


also ...some tanks will leak as you are putting them on....before you have it all the way on.....because the pin gets depressed before the tank o-ring seals....but if you just finish screwing it on it stops...

[PHiuR]

ssame thing happened to me thor... all you gotta do is sand down the asa part... a bit (tiny) and it will work.. my gun is a sts g3 btw... so... wat the guy above me said...

btw where is piranhapro?

[ds613]

You could try putting an o-ring in your asa

[Incube]

Sounds like a brass eagle.

All you should have to do is take it apart clean all the parts clean the inside of the gun. oil the orings and but it all together. dry fire it then hook on your co2. also you could need a new set of o rings check to see if your asa needs a ring.