help with ram problems

[pbgod68cal]

i think mi stack ram is busted or some thing when i shoot the bolt and back block stay back at first i thought it was mi orings on the bolt not enough lube so i oild it up still not workin so i then oild the three way and triggerplate and stuff still stickin in the rear position. so i then checked mi cocking rod i thought maybe that was bent and it was so i took it out and shot it and still stuck so i switched to mi other cockeing rod still same prob. so i have no clue what it could be its gotta be the ram so how do i go about fixing it or do i gotta replace it

[pbgod68cal]

and mi gun is timed so thats not the problem

[magicsly1]

when it sticks just adjust the pressure on the horizontal reg (pnuematics regulator). If that doesn't work get a new ram.

[pbgod68cal]

new ram it is then cuz iv adjusted every thing mi rhino reg and the vigilante when i took it off cuz its ugly i tryed it for the hell of it

[pbgod68cal]

well what ram do you guys think i should get i like the clipards

its gotta come in blue or chrome

[magicsly1]

A ram is a ram pretty much. You could get a ram that is slightly better than all of the others. I know there was a thread about this. Might want to search for it. You can never go wrong with P&P and Shockteck. I've heard some good and bad things about a.n.s. so i would stay away from them. But i've only heard of problems with the 4 way and regulators. So i'd go for performance.

[pbgod68cal]

i think im gonna go with a clipard or sto and if i can find one id realy like one of the palmer ones

[Silent Knight]

so many choices...:D

may I suggest STO, or Shocktech

[pbgod68cal]

mmmmmmmmmmm its probly gonna be a sto cuz every one has them but what ones are on the free flows cuz victor is only an hour from mi house and thats where free flows are made they got a pro shop i might go get one there but i need one by monday i got a big game with some freinds and i need to kick some butt so i need a working gun so im just gonna go to the closest pro shop i can find cuz im in pa for the weekend

[Silent Knight]

FreeFlow Autocockers use the infamous! STO rams... good stuff!

[pbgod68cal]

im gonna go by a all new pnues tomarrow i hope all exept a reg cuz i got one im probly gonna go with the sto ram and new k2 milled 3way by kapp or a bomb if they have them

[vantrepes]

If your ram was so far gone that it's sticking back, you most likely have a huge amount of air coming out of the three way when it's gassed up. Take the gun to pro, and have them check the trigger, sounds like it might be sticking back, and that's causing the problem.

[pbgod68cal]

yea i took it to mi pro shop today they fixed it he said it was the frame i put on it cuz i got a new kapp one but it was doing it befor that so i donno im gonna get a new one in a bit mi moms not letting me get any thing for a bit cuz mi bday is in a couple of weeks so she better get me it

[pbgod68cal]

hey vantrepes are there any good pro shops in rochester cuz im getting tired of the bs at the one i go to there a rip of they charged me $20 for them to say your guns not timed and for them to time it for me when i coulda done that mi self theve been b.s.in me alot about hpa to so are there any good pro shops with cocker freindly employes:)

rochester is about 40 min away from mi house so its not a long drive either way wether i go to buffalo or rochester

[vantrepes]

Well, you can come down to Indoor Splattbal (http://www.indoorsplattball.com) for an open game (Thurs and Sat 7pm to 10pm) and I can take a look at it. I'm the field gun tech. No charge if you're playing, and you don't mind waiting if I have to cut a spring, I can slip you in if your not playing.

There is also Paintball Games Supplies on Despatch Rd. in East Rochester, and Performance Paintball on Chili Rd, near 390. Chris Martello (I just butchered his last name) from Sonic Rage owns the store. But both of them charge about $20 to take a look at it.

If you know you want/need a part, e-mail me, and I can have the owner bring one down to the field for you. He may not be the cheapest, but you won't have to pay the fee to get your gun looked at.
vantrepes@bluefrognet.net

[pbgod68cal]

ok thanx ill see if i can get down there i clicked your link for the indoor splat ball it no workie

[vantrepes]

oops, sorry, its: http://www.splattball.com

[pbgod68cal]

i was getting confused on your web sight is the feild or pro shop in the same spot cuz theres like 3 diff maps cuz mi mom said she'll take me if she can find it easly

[vantrepes]

I'll be at Indoor Splattball, the downtown Rochester location. Right off the inner loop. It's our indoor (suprised?) field.

[pbgod68cal]

so if i go what should i do just ask for some dude named vantrepes cuz i'll more then likely will be able to get there