Best Gun Oil for TES

[mmsspaintball__]

whats do you guys think is the best gun oil/lube for the TES, and this is for just general oiling (like bolt, hammer and other internals)
i doubt it, but has anyone tried the Evil Pus? is that any good in your opinion?
thanks

[Kingman27]

Gold Cup is good.:)

[macfights]

kingman is correct

[yuri]

I use PMI oil works well for me

[big0jig0]

oh i think the best lube is ky.... wait nm thats for something else. na but for real i just use this can of oil i have around the house thats for like guns and other stuff called "Super OIL" "The premium household oil" and it works just fine.

[Zujin]

Gold Cup always worked fine for me. Oddly enough i still have half a bottle and I can't even use it on my marker now.

[mmsspaintball__]

Originally Posted by Zujin on 01-15-2004
Gold Cup always worked fine for me. Oddly enough i still have half a bottle and I can't even use it on my marker now.
why can't you use it on your marker anymore? new marker or did somehting go wrong :( ?

and has anyone used the evil pus yet? still don't know how good it is...

[Zujin]

Originally posted by mmsspaintball__

why can't you use it on your marker anymore? new marker or did somehting go wrong :( ?

and has anyone used the evil pus yet? still don't know how good it is...
I knew someone would ask that question. But on Impulse's u can only use Dow 33(its more like a grease) or it voids the warrenty.

[pickles8806]

PMI perfect oil is where it's at.

[Ivar Nelson]

For the bolt/striker assembly I use Penn's Fishing Reel Lube! It's a higher viscosity than most gun oil, durable, an excellent lubricant, and available at almost any sporting goods store. It really lasts longer and provides better lubrication than, and will not evaporate like thinner oils. And..... it's cheap. One caution: don't put it on your pin valve assy. and blow it through the reg. I don't know what would happen in that mechanism. Stick to the regular stuff there.
Any lube that will stand up to a 100 pound yellowfin tuna's full speed runs, when squeezed between the discs of a drag mechanism on a fishing reel is skookum* stuff.

*NW Indian word for strong, tough, etc.

[joeballer]

Air Tool Oil works great, and is reccomended by Palmer's.

[fireresq51]

I bought some evil pus about 2 weeks ago and have used it on my Tes with no problems so far. my boys have used it on a spyder esprit, electra, xtra with esp trigger and have had no problems with any of those either

[mmsspaintball__]

k, thanks alot for that info fireresq51, finally someone answers the question.

[fireresq51]

It's thick like grease so you don't have to use much for it to work and it has kept my TES lubricated very well. I have played twice since I got it and had no problems. I haven't had to put any more on since I put it on the first time.

[macfights]

did you put it on the bolt o rings?

[fireresq51]

Yes I did. It doesn't seem to hurt anything there either

[macfights]

kewl... i was wondering about how it affected the eye

[josh_hill]

Whatever lubricant you decide to use, just make sure it is NOT petroleum (sp?) based. If it is it will eat away at your o-rings, or make them all loose and floppy. No one likes big floppy o-rings!

[fireresq51]

It hasn't affected the eye on the TES yet, it has continued to fire normally