Do you need......

[beeper]

Do you need an expansion chamber if you have a regulator? I am talking like the Ergo reg or Pure Energy. Also can you buy C02 tanks with a pre-installed anti-syphon tube, and if so where. Thanks for the help
beeper

[Magadeth]

You dont need one, but it wouldn't hurt.

I think the best way to wrk that is to have the gas flow into the x-chamber, then regulate it. That should provide for the most consistent pressure.

[in trauma]

foget x chamber

get a 1/8 compresion fitting
and about 6 in of 1/8 copper tubing and take out your pin valve and the you will see a little plug there use and allen wrench to tkae that out and the screw the compression fitting in and take the cap off the other side after that put the copper tubing in there and bend it the right way


note: before you start screw the tank all the way into the ASA and mark the top of the pin valve so you can point the end of the copper tubing



that is how to make and anti SIPHON