dwell setting?

[tippypimp06]

hey i just got an impulse and was reading over the manual and when i got to the dwell part i got a little confused. how do i set it, how do i know where it's at, and how do i get it as effecient as possible? thanks

[toothpastedog]

well, you never really know where it is at. do you have an lpr? if you don't set you max-flo to 140 or 150 psi and then go to the chrono station and adjust your dwell untill you hit 280 fps. you do this by getting a very thin allen wrench or paper clip or something and sticking it into one of the two holes on the left side of your impulse. the right hole increase the dwell and the left hole decreases it. after each time you press the button you will hear it chirp. don't hold down the dwell button with the allen wrench or what ever, unless you want to go to max/min dwell setting (you shouldn't ever need to). if you have an lpr set you max-flo to 150psi, set you lpr to max output (150psi) and then set your dwell to 300fps. then raise your max-flo pressure to 200psi and while keeping your dwell where you set it, lower your lpr pressure untill the chrono is reading 280 fps or so.

[tippypimp06]

no i dont have an lpr.do i need to go up or down with the dwell? alrite appreciate i'll try it out.

[toothpastedog]

set your gun's pressure at about 200psi and lower the dwell alot. this will result in alot more kick and better efficiency. it aint worht it in my opinion, it would be better to do what i already said, but if you want efficiency w/o an lpr, then raise max-flo to 200psi and lower dwell.

[tippypimp06]

before you told me to put it at 150. so which do i put it at?

[csjets14]

ok.. set ur psi around 150 - 160 ... then use a little allen wrench or paper clip and stick it in the left dwell button... Hold it in until it gets all the way down and u will hear a deeper sounding noise when u get get as low as the dwell will go.... Next take the allen wrench/ paper clip and stick it in the right dweel hole... count each click and shoot ur gun after each... On my gun 12 - 15 clicks does the job.. so i hope this helped u out