PDA

View Full Version : Need Help Deciding


Benz
01-27-2004, 11:50 AM
ok, I really didnt know where to post this...

I have one sucky gun, and I am probably gonna get a new gun, I was either gonna get an classic 68 automag or a Tippmann A5 with a RT and a Flatline Barrel.Now that maybe a stupid question, but I am definately probably gonna buy the A-5 over the Automag, but my friend keeps on telling me to go with the automag...(not interested in tournaments so the RT doesnt bother me)

PMI_Guy
01-27-2004, 11:52 AM
Automag.


:tup:

Benz
01-27-2004, 11:53 AM
why...I would think the A5 is soo much better with a Flatline and RT I also dont play at fields, I play woods 80% of time

hybrid-sniper
01-27-2004, 12:08 PM
68 mags are alright, but im sure there are waay better used mags out there that come with lots of good upgrades

Benz
01-27-2004, 12:10 PM
I find that the a5, should be way more accurate with the Flatline, and the Rate of Fire is real Nice

TheMexican
01-27-2004, 12:16 PM
Flatline + RT isnt that good of a combo, I found that when shooting fast my Flatline would break balls...

Benz
01-27-2004, 12:18 PM
Just give me some reasons why...I mean, I've head the Flatline Barrel is Dead on Accurate, with its extra 100ft...I heard the Automag is decently accurate.

thermus117
01-27-2004, 12:20 PM
The flatline is WAYYYY overrated... Its just not that good. Period. Your much better off spending 400 on a used mag with tons of upgrades that 400 on an A5.

Benz
01-27-2004, 12:20 PM
my A-5 will cost 420 Dollars. and I've seen the Flatline, it owns.

hybrid-sniper
01-27-2004, 12:21 PM
yes but with the flatline you HAVE to use good paint or else it turns into one hell of a blender, and how fun is it to squegee out that beast of a barrel.
automags have very little kick and with level 10 you wont chop and with a good barrel, just buy a large bored barrel and use whatever paint.

133+ Player
01-27-2004, 12:21 PM
I've seen many a horrowshow with flatlines, balls breaking and a hell of a time cleaning them. I've heard many say they are fine... though I'm doubtfull. Flatlines are also highley inconsistant when it comes to their "accuracy". The automag should shoot consistantley strait, the flatline is gonna be weird.

Benz
01-27-2004, 12:23 PM
I know many people with A5's and never complain, and dont know anybody with an Automag.

The.Wamp
01-27-2004, 12:30 PM
Mag>A-5

Sure the A-5 will shoot further, but better accuracy that debatable. If you get the new valve (RT Valve I think) it is the fastest recharging valve available, which makes the mag more consitant. Better consistancy helps with accuracy, also if you get a freak kit (or other barrel kit which you'll only have to play slightly more for than a flatline) and that will definatly improve accruace seeing as accuracy really depends on ball bore match. If you get the flatline though you can't match it up. I'm pretty sure you can get an RT kit for a mag (may be wrong), plus getting a level Ten bolt will make chopping almost impossible.

Mag
-Smaller
-lighter
-Better consistacy

Mag w/ Level ten bolt and Freak kit
-better accuracy
-less chopping

133+ Player
01-27-2004, 12:30 PM
Flatline sucks. Its that simple. For 420 you can get many a non-crap gun, rather then spending 420 on the worst excuse for a barrel ever.

sIc
01-27-2004, 12:35 PM
If your just going to defend a flatline the whole time, and not go with the majority (the wise ones) buy a flatline and find out for yourself.

BTW, good luck with the flatline, youll need it. :rolleyes:

Benz
01-27-2004, 12:51 PM
hey, I'm not trying to defend it, its just what I heard, and seen.

pbhippie ben
01-27-2004, 12:54 PM
Dont ask for advice if you wont take any. Do what ever the hell you want, but when you find your setup sucks, too bad.

Benz
01-27-2004, 12:57 PM
so where I can find this RT Valve

Benz
01-27-2004, 12:59 PM
I hope your not talking about the AGD RT Retro Valve

pbhippie ben
01-27-2004, 12:59 PM
Lots of places, pbgear.com, or airgun.com.

Benz
01-27-2004, 01:03 PM
I also dont have Nitrogen, nor the money to afford it as of now if I purchase Either gun, I hear that its like impossible to use the Automag if u have Co2.True?


Also, if your talking about the AGD RT Retro Valve I dont have the money for that either, 250 for a valve.

133+ Player
01-27-2004, 01:08 PM
I have a small feeling you are getting advice from real world idiots. You think flatline is good and an automag can't fun on Co2......


Ok thanks its been great....

Benz
01-27-2004, 01:08 PM
Try reading some of the reviews on the automag ., just some of the things I picked up on it, I know it can run on Co2, but I hear it doesnt run good with it, damn I have to write everything ing perfect

Benz
01-27-2004, 01:15 PM
alright, forget the Automag and A5 what would also be a good gun for under 500 dollars.Is the MiniMag Pretty good, sometimes the reviews just cant say enough.

The.Wamp
01-27-2004, 04:28 PM
You got 500 to spend buy a 2k3 VF Autococker and a crossfire high output 68ci 4500psi tank.

Woods Sniper
01-27-2004, 05:35 PM
A stock Impulse is $425 and can run on Co2.

SpyderLuvverX
01-27-2004, 05:39 PM
But he needs to buy several other upgrades to make the impulse good, from what Ive heard.

Woods Sniper
01-27-2004, 05:56 PM
It would still rawk an A-5 all to hell.

sIc
01-27-2004, 05:56 PM
A trigger is the only main thing, though a bolt and lpr are quite helpfull too.