how do iknow

[dropkickmurphys]

how do i know if my bolt is properly put in my gun. im a bit intimidated to do a field strip so tell me how to do a field strip and how i know my bolt is in my gun properly

[pokinatcha]

to fie;d strip take out the pull pin on top of the gun and slide the bolt out the back. when you put it back in slide it forward. if ti comes back it should be in.

[Mok14]

Assuming your bolt is like my 04 model (its the same procedure, im sure), this should work. First, pop out the pin. Pull out the bolt. clean. Look into the gun without putting the bolt in and you should see a gap in a metal rod-like object (hammer). Put your bolt in, and then look thru the hole in the bolt and line it up with the gap in the hammer. Push the pin thru the bolt and into the gap. You will know you did this correctly if there is tension when you try to move the bolt pin forward. If it moves freely, you probably missed, so try again. Ive very simple, really!!

[dropkickmurphys]

my bolt moves a tiny bit side to side is this normal. it only moves side if i move it with my fingers

[pokinatcha]

yeah it does that on mine too

[xbulletproof89x]

it does it on my bros 2