What does everyone have on there tippman?

[BigVigalante]

Right now i've got a c98 with the electronic conversion drop in, 12" J&J Full Tilt, Ricochet 2k, and a double trigger. Oh one last thing does anyone know what size orings go on C02 canisters? thanx and plz post what you have.

[in trauma]

i have
m98
12" J&J ceramic barrel
custom drop forward
Full Boar shadow
20oz anti siphon

that is about it

all you relay should put on a m98 is a a drop forward new barrel and everything else is for show

[moodydoody]

my sig plus ricochet 2000 and 20 oz co2 tank and I think that's it. I am soon to get a sidewinder reg (I think haven't decided for sure yet) and ether a pure energy 88 45 or centerflag 68 45.

[macdruen]

ok here it is

98 black
flatline system
rt trigger
low pressure setup
pure energy reg
pure energy thor reg
pmi 68 4500 tank
ballistic drop
custom built anti chop delrin bolt
12v rev with upgraded board.
armson pro dot sight
all black

this is my back guy setup or wood ball setup when i camo it.

Below is my main setup

[GreatOne4486]

Tippmann Model 98
Tippmann Flatline Barrel
Tippmann Verticle Adapter professionaly installed
Tippmann Expansion Chameber professionaly installed
Tippmann Rear Cocking W/ Velocity Adjuster professionaly installed
Starfire Bolt
Maddmann Spring Kit
Home Moddified Stock Elbow(Two Drilled Holes In The Stock Elbow So Excess Gas Wont Push Back The Next Ball) It Acts As A Powerfeed.
A Proffessional Cleaning Job By My Local Store( Ans Xtreame, They Cleaned, Oiled, And Replaced All The O-Rings)

[Ridge Boy]

Tippmann 98 w/vertical feed-KAPP high rise & custom Crazy Dipped finish(blue/gold splash)
EM98 Electronic kit(E-Bolt)
PMI dropforward
THOR Regulator
PE 88cu.in. 4500psi
LAPCO Nickel fore grip
Double trigger w/trigger adjustment screws
LAPCO Nickel trigger gaurd
Freak Barrel kit w/blue 10in. tip
Ricochet 2K(wired into the gun's board)

[chynzexguy]

everything that is in my sig

[tut00]

I have the following on my gun.

12 inch 32 Deg. Night Stick Barrel
Tippmann Expansion Chamber
View Loader Hopper
Coil Remote

[SoNiCIMPLUSE]

M98 Custom
Flatline Barrel
R-Trigger system (kicks azz....)
Rocket Cock
CAR-Stock
Tippmann X-Chamber Kit
Daisy 32x Scope (Used for TRACKING NOT for shooting or sniping)
Ricochet AK (The new version of the 2K)
Homemade Drop Forward
Tippmann LP Kit
And a Air America Apocolypse 2K 68cc

[Crisfofusu]

dont ya just love the flexibility of 98's?

This is my 98 with all my other gear (http://www.fofusuland.com/pball.htm)

[detention489]

Tippmann 98 custom
SP AA 12"
PT CAR Stock
Dye Stickies
12v Revvy
GTA Double Trigger
Lapco Raised Sight Rail
Tippmann Vertical Adapter
PB 8 Stage X-Chamber
Tasco 4x15 Scope
Pure Energy 48 CU 3000 Psi Nitro Tank
Spee-T-Cocker

And I'm getting a PB DF as soon as I have the $$.

[Crime Dog]

Flatline (soon changing it out for a SmartParts AA)
Tippmann Expansion Chamber
Tippmann Double Trigger
Lapco raised sight rail
Tasco 1x Red Dot sight
Custom 3 color camo paintjob (did it myself)

Eventually I may get the Full Boar Shadow setup. We'll see. Not planning on getting a stock. Fairly pointless. Waste of money.

Polished and quieted the internals myself.

[Pookister569]

wow... everyone has a lot of crap on their gun... :(

well i don't have much, here it is:
Flatline barrel
Tippmann expansion chamber and vertical adapter (obviously)
and... thats it. i have a regular 20 oz co2 tank.

well i wanna get a full boar shadow and a revolution sometime in the near future.:P

[chynzexguy]

the guy who says the rt is not worth it is totally bsing, my rt shoots really fast,especially after i took out one of the spring that are on the trigger.if you get the rt make sure your using compressed or else you'll get major shoot down

[compadre7]

in the sig

[liquidsoul_sm]

sig

[C_Giboney]

Have a nice X-Chamber (4 stage)
@ barrles Stealth and Excel
Spring Kit
thats about it now, im about to paint the gun and get some sticky's and 2xtrigger

[bobwill]

Silver M98 Custom
20oz CO2 with anti-syphon and Smart Parts On/Off valve
Clear 12v Revolution
Black Psycho Ballistics Universal Drop Forward
Aluminum Lapco Autospirit
New Psycho Ballistics Double Trigger (the guard is now identical to the Tippmann Double Trigger)

[pbsniper111]

This is my modest sniper setup

tippmann 98c
flatline
cyclone feed
air-through stock
double trigger
rt
pure energy coiled remote
68/4000 crossfire
Woodlands camo on hopper, gun, tank, and barrel
dye stickies
adco imp sight
expansion chamber
starfire bolt
and still more to come........

[XPEDER]

I have 98 custom with dop rva, 14 in pathfinder barrel

[WhiteFoxYoko13]

My signiture, plus I'm about to get a expansion chamber kit

[no_pain_no fun]

\/ \/ \/ \/ Loook Down Man \/ \/ \/ \/

[HCOdye]

silver a-5
laco snapshot barrel
lapco front grip
palmer stabalizer
e-grip
jcs dual trigger
shocktech supafly bolt
jcs RVA
r5 ricochet hopper
shocktech dovetail drop forward w/on off ASA
thats about it I have a 20oz tank with an on off switch and a dye rhino cover

[Deathfrombehind]

i have a 14" j&j ceramic
-soon a double trigger

[SEAL34]

Tippmann A5
-Realtree camo kit
-MWAG, PbR, and PbNation stickers
-two-way GTA E-bolt ram w/ PE QEVs
-Lightened hammer
-DOP Proseal
-Polished Internals
-JCS trigger
-Frenzy 127.4 LCD board
-Alias solenoid, membrane pad, and wiring
-LP Palmer's Inline stabilizer
-Palmer's Micro Rock LPR
-PMI LPC
-14" Dye UL
-Ricochet R5
-QEV'd Cyclone w/ LP hoses and flow control

I think that's it...

[Conker]

Tippmann 98 with:
Tapco T6 buttstock
16"" Smart Parts Progresive
cyclone feed
Nothing else I hpe to get a response and maybe a flatline when I get some money.:)

[no_pain_no fun]

Tippmann A5
-Realtree camo kit
-MWAG, PbR, and PbNation stickers
-two-way GTA E-bolt ram w/ PE QEVs
-Lightened hammer
-DOP Proseal
-Polished Internals
-JCS trigger
-Frenzy 127.4 LCD board
-Alias solenoid, membrane pad, and wiring
-LP Palmer's Inline stabilizer
-Palmer's Micro Rock LPR
-PMI LPC
-14" Dye UL
-Ricochet R5
-QEV'd Cyclone w/ LP hoses and flow control

I think that's it...


Lol but does it work...

[Conker]

Yeah I bet it works.:laugh:

[irish_lush]

check the sig

[CaffeineBoy]

check my sig.

[pbjoe693]

Tippmann 98 Custom (Current Setup)
Cyclone Feed
Response Trigger
T-Fitting
Proseal Aluminum Powertube
Proseal Front Bolt
Maddman Spring Kit
Tapco T6 6 Position Stock
Tippmann Pro Drop Forward
Polished Internals
Ben Tippmann SBS (Sealed Bolt System)
Stainless Steel Screws
A3 Flat Top Removable Carry Handle
Single Side Weaver Carry Handle Scope Mount
Simmons 4 x 32 Scope
1" Weaver Base Scope Rings
OPSGEAR Dishka Flash Suppressor
Weaver Rail Flip Front Sight Post
Weaver or RIS Quick Connect Sling Adaptor
EZ Sling
OPSGEAR Raider 9" M4 Weaver Hand Guard
OPSGEAR M4 Mag Kit
Deluxe Black Ergonomic Foregrip
OPSGEAR 18" Interceptor Barrel
Integrated Weaver Tactical Retracting Bipod
A-5 Offset Hopper Adaptor
32 Degrees Remote Coil
Pure Energy 48cu 3000 PSI Tank

Other Accesories That I Have For My 98
NcSTAR 1 x 42 Red Dot Sight
Tasco 1 x 30 Red Dot Sight
Allen Padded Carry Sling
Flatline Barrel
Sling Swivel
Tac-cap

Tippmann A-5 (Current Setup)
JCS Red Hot Powertube
Response Trigger
Maddman Spring Kit
Polished Internals
Flatline Barrel
OPSGEAR MP5 PDW Folding Stock
Sling Swivel
Allen Padded Carry Sling
OPSGEAR UMP Gas Through Mag
240 Round Hopper
Tippmann Remote Coil

Other Accessories I Have For MY A-5
OPSGEAR 6" CQB Barrel
Tapco T6 6 Position Stock
OPSGEAR 7" M4 Hand Guard
OPSGEAR Dishka Flash Suppressor
JCS 98 to A-5 Barrel Adaptor

[20 yr old Faust]

Black Tippmann A5 (Point Man, my fav pos and maker)
Flatline
SAW stock
Modified TacCap
2x 3.5 oz co2 (screwed right into the tombstone)
R/T (needs new o-rings)
Custom made spring
Shotgun bandolier on stock (holds six 10 round tubes)
(front grip removed cuz I always lose the set screw during big games)

Black Tippmann A5 (Team Leader)
Flatline
Drop forward
R/T
20 oz co2

Black Tippman A5 (Heavy Weap)
Ricochet R5
SP progressive (Spyder threads)
R/T
20 oz co2
Evil barrel adapter

Black Tippman A5 (Rear Security)
SP progressive barrel (Tippmann threads)
Car Stock
16oz c02
Remote line

--None Tippmann crap--

Spyder E-99 (back up)
SP Progressive
some agitator hopper
16 oz co2

Spyder TLX (back up)
SP Progressive
some agitator hopper
16 oz co2

Armotech Zeus G2 (Secondary weapon for me, pointman)
Quick cap
Bottom line (not installed)
Sweet grips (don't remember what company)
Shotgun bandolier (for 12grams and 10 round tubes)

[next#1playr]

98 custom
evolution 2 loader
double trigger
Respnse trigger
pmi 14" razzor barrel
Pyscoballistics Delrin starfire bolt
Homemade bi-pod and tank holder
pmi remote
and for fun a M-16 carbide stock
I want a drop forward

[Blackcobra]

Tippmann 98 custom pro e
Flatline
32 degrees Quiet riot
double trigger
empire reloader 2
rocket cock 2
drop forword
32 degrees exspanion chamberthats what i got and yeah it rocks

[vdubdriver]

"Midnight" - My gun (all black)
JJ Cermanic 14" barrel
SP Teardrop 14" barrel
Tippmann X-Chamber
Tippmann Double Trigger
Psycoballistic Drop Forward
4" steel braid hose from X-Chamber to Drop
90 degrees nickel plated hose adapter
Rocket Cock II
DOP Rear Velocity Adjuster
Side Velocity Adjuster
20 oz CO2
Shocktech Supafly Bolt
Ricochet AK
(Pen Spring mod and ortho elastic mod)

[Cpt. Morgan]

My Tippy - She is called Bessie... funny story...:crazy:

Tippmann A-5 (Winter Urban Camo)
Response Trigger
12" Smart Parts Progressive
Palmer's Male Regulator
20oz CO2 tank with on/off and anti-syphon

Contemplating polishing the internals and engraving a name. Also have 2/3rds a super r/t (I'm still making nice to tippy support)

[TBuck]

Mine.... not much..: 98C
RT
Rocket cock
14" Werks Barrel

As for the O-Ring on the Co2 tank question, Most stores that fill your tanks have extras. Just ask for one they will give it to you (at least they usually do)

[ebbs 74]

GUN SETUP
TIPPMANN A-5
CUSTOME DERSERT PAINT JOB(thats real efen sweet)
FLATLINE BARREL
SIGHT HOPPER
F/X SIGHT RAIL
F/X SNIPER STOCK
MP5 GUN CLIP
REMOT CORD
E-GRIP(thats efen sweet to i recomed getting one but if you do dont crank the balls per second up leave it at a good number around 14 for maximum performence unless your doing air ball the number of balls your spittin out doesent matter that much when your playing bush ball u wont no the differnce)
AND AS FAR AS MY PAINT JOB GOES I BOUGHT SOME CAMO PAINT FROM CANADAIN TIER I BOUGHT TAN BLACK AND OLIV.... IF YOUR INTERESTED JUST TAKE YOUR GUNA APART AND PLUG YOUR BARREL THEN JUST MAKE A KIND OF TIGER STRIPE UP AND DOWN GO FROM DARK COULAR TO LIGHT
THIS IS MY GUN FOR NOW I HOPING TO UPGRADE MY GUN EVEN MORE WITH A SLING AND EXPENCEN CHAMBER AND UPGRADE TO USING AIR I DONNO IF ITS WORTH IT THOUGH

[Squirrelking]

in the sig

[Rozencrantz]

Currently: (I've only had the A-5 a month)
-A-5, standard trigger
-12" Dye Excel barrel (got a great deal on it)

Plan to get:
-MP5K sim extendable stock from OpsGear
-remote rig
-80ci 3000psi CA tank
-G36 shroud, also from OpsGear

...And her name is Winona.

Maybe I'll get a flatline; I'm not much of a longballer, so I don't know. They are indeed righteous...

[rawker]

sig