PDA

View Full Version : Need Help Bad!

Deer Hunter
02-21-2004, 04:02 PM
I took apart my 98 custom w/ ballistic sports kit and i can't get it to go back together. Can someone send a pic or something showing me every step to puttinbg it back together.
Socom6789
02-21-2004, 04:04 PM
Uhhh...look in your manual...
Deer Hunter
02-21-2004, 04:05 PM
It didn't come with a manual.
-=ReD-hAzE=-
02-21-2004, 04:06 PM
Put everything back where you found it. :o
Deer Hunter
02-21-2004, 04:08 PM
There is something blocking it from closing together. I know where everything goes, there is just soething keeping me from ptting it together. It is pissing me off.
Pea Shooter
02-21-2004, 04:15 PM
Originally posted by -=ReD-hAzE=-
Put everything back where you found it. :o

I think that's the part he's having trouble with. Check the Tippmann site (www.tippmann.com), I'm sure they'll have something that will help you out.

On another note, if you are ever able to put your gun back together, the next time you take it apart, take a paper towel or something and lay all the screws and internals exactly where they were in the gun on the paper towel. That way, you won't have to remember where everything goes. :D

Edit: Same thing happened to me, did you unscrew both screws on the ASA? If you did, make sure they and the nuts they screw into are in the gun correctly.
Socom6789
02-21-2004, 04:16 PM
Search and you should be able to find a diagram of it on a site.
Deer Hunter
02-21-2004, 04:21 PM
I have already done a search. Nothing that I found.
Socom6789
02-21-2004, 04:26 PM
http://www.dropzonepaintball.com/dropzone/dept.asp?dept_id=9299

Wow, it took a whole 10 seconds to find. Search harder next time ;)
Deer Hunter
02-21-2004, 04:29 PM
Originally posted by Socom6789
http://www.dropzonepaintball.com/dropzone/dept.asp?dept_id=9299

Wow, it took a whole 10 seconds to find. Search harder next time ;)


Uhhhhhh, that isn't what im looking for. Ebolt!?
hambone
02-21-2004, 04:59 PM
here is one spoon fed answer that took a whole 11 seconds...and yes i timed it

http://www.tippmann.com/support/manual/98eboltmanual.pdf :banghead:
lance9001
02-21-2004, 05:03 PM
sometimes the front sight can be trouble when youre trying to get stuff back together... specially if you messed with the hopper elbow... um... i trust you kept all the parts on one of the receiver halves...
Deer Hunter
02-21-2004, 06:08 PM
It was the velocity screw, it was too far out and would snag the receiver. All good now! ;)