where is the dwell control?

[Mokushi Faitaa]

Where on the gun is the dwell control? I've looked at the diagrams...I've seen the pics of it on the board...but how the hell do you adjust it at a chrono? You don't have to take it apart everytime do you? And what kind of tool do I need to adjust it? Just a flat head screw driver? I need details....this is making me feel real stupid


Ulp...I just took a look at the rubber thing and pulled it off....I found the dwell....*is smacking his forehead right now*

what do you guys use to turn the dwell ? will anything work? or will I end up breaking it if I use...say my finger nail, or the tip of finger nail scissors.

I got HPA today and I need to get this thing tweeked, before I play again.

[bbqchicken8]

you need a small flat head screwdriver. i took clipped part of a coat hanger and shaved it down to a flat point w/ my grinder. then i used that till i could find where my electronics screwdriver went.

just in case you don't know, clockwise shortens dwell and counter clockwise increases dwell. don't twist all the way around cause it'll mess it up. just go to those two dots but no farther. as long as you are gentle w/ it, you won't break it.

[Killer Kat]

A Jewelers screwdriver works best or one of those little repair your own glasses kits they sell at the check out at the grocery store would work!
Once your input is set at 180 psi, start shooting over a chrono station and adjusting the dwell until your f.p.s. is at 285.

[Mokushi Faitaa]

I got my little precision screw driver set last night...pulled out the pocket chrono...and got written up for shooting my bathtub again. Those ****in *****es that live next door can suck my ****....

anyway, I got my gun all perfect now, so that's a good thing.

[joejoe]

Hmm, I'm going to need a special screwdriver as well?

What else do I need to know? I thought I had everything figured out. Dow 33, [well, I knew about it, but forgot about it], special screw driver...what else? :confused:

[Killer Kat]

Just time Joe! Time to play, Time to re-read the Impulse FAQ thread, and Time to think about upgrades!

[joejoe]

That's a lot of time. Time is money. And time waits for no man.

What that means...not sure, was an impulsive line of words. :P