Bko Problem

[Dyno247]

alright a friend of mine is letting me barrow his gun. he told me that when you air the gun up the air doesnt go inside the gun. Well when i tried it doesnt work. i have the bolt in the right way and i have the on/off on. then when i look at the gague it reads 0 psi. so then i turned up the hpr (inline reg) and i put it at 200 psi. what should i do? i tried readjusting the lpr but nothing. i just wont shoot.

New Problem
when i was running out of air i could still shoot it but i heard a weird sound inside it by the trigger frame. is the solenoid blown? or what? can it be fixed? cuz i hope i dont have to replace anything....

[Spinach]

The tanks pressure is 200<. I had the same problem.

[Dyno247]

well i fixed it i put the pressure at 225 psi and my lpr was set to high too so i lowered that down, but now i have a new problem when i was running out of air i could still shoot it but i heard a weird sound inside it by the trigger frame. is the solenoid blown? or what? can it be fixed? cuz i hope i dont have to replace anything....:(

[polemos]

There are several online guides around laying out how to set your regulators up. The ICD website is a good place to start.

225 HPR - Turn the LPR counterclockwise till no air is flowing to your solenoid.

Degass your marker. Re-gas your marker. (resets your LPR, sometimes it sticks)

Slowly turn your LPR up till it fires use 1/4-1/2 turns. Then check your Fps over a chrono. Keep adjusting till you can get the desired velocity.

[Dyno247]

yeah i did that. but theres a new problem... here

new problem when i was running out of air i could still shoot it but i heard a weird sound inside it by the trigger frame. is the solenoid blown? or what? can it be fixed? cuz i hope i dont have to replace anything....

[dropkickmurphys]

that happens to me every time i run out of air./ fill te tank again

[[Infusion]BigC]

Yeah, just get your tank filled.