help please

[Rob1313]

i already posted this thread a while ago and someone did help me, but i have another question....i have a pmi pure energy regulator and it is leaking air, its not coming from the part where the black meets the crome, its coming from the line below that one, i can't figure out how to open that part up, so if anyone can help me that would be great, thanks a lot
rob

[elTwitcho]

Phone up PMI and ask them how to disassemble your regulator if it came with no instructions. If your regulator did come with instructions, take it apart and check every o-ring in their. Almost all leaks are caused by faulty o-rings, and since your reg doesnt have a valve seat, or any 3 way hose... it's almost definately an o-ring problem :) Look for things like cuts in the o-ring, or if the o-ring is shredded right off, that's also a problem.

[elTwitcho]

And I forgot to mention, if you do find a defective o-ring, you need to replace that :) Get the proper size either from your instruction manual, or directly from PMI