Is The One trigger frame tournement legal?

[shoot-ya-later]

ok, i just installed another upgrade, and man does this thing rip. It does'nt seem to have a semi auto only lock out switch. Is the one kit trigger frame tournement legal?

[M3_Duck]

i dont know about your one "KIT" but... my stock one i had to jump the settings to get the gun to go to auto or any other shooting settings except for semi... so stock my one only has semi...

[shoot-ya-later]

rly, like dip switches?
ya i only ever use semi, i meen rly who needs full auto.I only bought it for that little less recoil action of the fully pneumatic so its rly gonna suck if its not tourny legal. ha, like my fingers can actually do 20 bps in the first place. Its got like 4 diferent firing modes.. when you said you had to jump the settings, is that right on the main board. hopefully i can shut off all those un-needed firing modes.. i wouldnt imagine the kit would'nt be any diferent from yours.. iam going to have to look a little closer now.

[mudhog92]

I have a TES and wuz thinking about the one kit vs just buying the whole marker, but I don't need anopther gun laying around. How does your TES with the kit work?

[shoot-ya-later]

well, lemme tell ya it was a pain in the arss. you would think that for the price you pay for the one kit it would come with the eye already installed.everything just swaps out and went real smooth untill i realized the one kit doesnt come with an eye. you then have to carefully to not damage either board take the eye board, with the allready connected eye, and the 4 prong little wire harness connecting the eye board to the main board out of the t.e.s. frame and install it into the new one frame(paying close attention to wich wire sets go to wich plugs).you then have to lenthen the trigger switch wires to reach the new eye board as they are to short to travel around the air valve in the one frame and still reach the board(belive me,i tried every way possable)
you will need a soldering iron and some solder to lenthen your trigger wires correctly. when game day came it performed perfectly besides some minor adjustments on the lpr & new reg getting it chronoed in.and yes it shot much cleaner with a noticeable less amount of recoil force. as for trigger speed i cant rly tell cuz i cant move my fingers that fast yet..all in all it was a very fun even though slightly complicated project, yet i felt it was totally worth it.i too didnt need another gun lying around.
I didnt notice if you've already done any trigger mods or not but this would also be the perfect time to install a new 50g. switch & possably a trigger if wanted.

[shoot-ya-later]

well duh.. ok feel kinda retarted now.. just realized that the one kit in auto doesnt rly fire in full auto just like the t.e.s. grip frame.. as for tourney legal though iam still not sure cause of the nitro mode?

[ucantmce00119]

When I put the ONE kit in my TES I didn't have any problems with the wires for the boards. I didn't have to solder anything or lenghthen any wires to reach the board. It all went together pretty smoothly. I went and played this weekend and it worked flawlessy. I was shooting at 306 fps with the reg set at 150psi. I didn't chop one ball even with the eye off. I was shooting too dark of paint for the eye to see it. That would be my only complaint about it at all. Other than that I think I have found my new favorite gun.

[mudhog92]

I have a TES and just LOVE it, stock. Rented and HPA tank this weekend and shot with that, too cold fo CO2. It worked great, no chops. If I stay with CO2, I have a fill tank in my garage, I was gonna get a Palmer stab. I am definately getting a Q loader, it looks like what I've been looking for. I am good with my hands and could do the switch, soldering, ...Maybe keep TES as backup and just get the one anyway, decisions, decisions. Thanx for the help. Check out my crazy stuff at http://paintballrow.proboards24.com/index.cgi

[M3_Duck]

Originally posted by ucantmce00119
When I put the ONE kit in my TES I didn't have any problems with the wires for the boards. I didn't have to solder anything or lenghthen any wires to reach the board. It all went together pretty smoothly. I went and played this weekend and it worked flawlessy. I was shooting at 306 fps with the reg set at 150psi. I didn't chop one ball even with the eye off. I was shooting too dark of paint for the eye to see it. That would be my only complaint about it at all. Other than that I think I have found my new favorite gun.

howd you get your gun to shoot that high of fps with only 150 psi??? you have a super gun or something?

[M3_Duck]

theres no reason to get a qloader... if there was the tourny players would use them... but they dont...

the pods are proprietary and they only hold 100 rounds... if you say you need it cause of its feed rate... yeah... i think you should buy one...

[unknownpsycho]

Originally posted by M3_Duck


howd you get your gun to shoot that high of fps with only 150 psi??? you have a super gun or something?
umm..... because he put the One in it...
Electros run at a significanly lower pressure than blowbacks.

[ucantmce00119]

It was shooting at 346fps at 250 psi so I had to turn it down. I set it at 150 and it was shooting 306fps. Maybe it's just the way both regs are adjusted that enables it to shoot that high fps at such a low pressure.

[gpfreak]

M3_DUCK M3_DUCK M3_DUCK M3_DUCK M3_DUCK

I saw that when u got the one it came as semi only. That is how mine was shipped. can you tell me how to jump the board to enable all the settings. Thanks.