Valve removale "for o ring replacment"

[2k2max]

Hi i was wondering if someone would tell me how to remove the valve. I dont know wich tools are needed to remove it. THanks alot.

[shneeko6]

ok all you need is a flat head screw driver and the right size allen wrench. First you remove your trigger frame and then you notice underneath the body there is a flathead screw. You unscrew that and set the screw aside. Next you unscrew the front cap (its underneath the barrel). Then grab a squeeqie or dowel rod and push the valve assembly towards the BACK end. Pushing it thought the front will break your o-rings. Then after you lube it...push it in through the back again...align it with the screw hole on the bottom of the body and reinsert the screw into the valve and reassemble.

[toothpastedog]

"Then after you lube it..." lube the o-rings on the valve, not just the valve body-if you don't your gun won't work right and it'll leak.

[Gibralter]

What they said, just be sure to do it out the back. 1st two times i got the valve out through the front and shredded O-rings. Just another reminder.

[2k2max]

THanks alot for the help everyone. The only problem i really have is getting the orings to stay on valve when pushing through front or back. THey often tear but i stupidly forgot to lube them... i s vaseline a no no?

[toothpastedog]

vasiline will work, but you should be using dow 33 lube-like the lube you use on the ram.