pen springs for trigger..

[Ohondareal]

im going to be gettin the egrip and i was readin all teh reviews about it then i came up on this one review where the guy said he changed the springs for his trigger to make it more sensitive to have a lighter/easier trigger pull, i was wondering if any pen spring would work and also were exactly would i place it..also i read that it has a trigger pull like pressin the button on a mouse......haha, help if you could or clear it up for me.. .thanks

christopher

[Ohondareal]

also i've read about the double trigger not workin with the egrip... just wonderin what all the heads have to say that did or have this on their gun: egrip w/ dble trig.

[yakitori]

I dont know about the A5 much, but Im sure its not much different than the custom. Pen spring needs to be cut to the same length as the stock trigger return spring. Its the one in front by the safety.

Also I dont see why the 2trigger wouldnt work w/ the Egrip. If so, you couldnt walk the trigger in semi and that would be a waste. Thats one reason why ppl go electro right.

[lance9001]

ur not gonna get a mouse-click grade pull from a mech trigger. if i had the a-5 i would surely get an egrip

[Henry VIII]

Make sure you get the GTA double trigger with your e-grip and you should be ok.

[Greedy]

You can replace the return spring with literly any spring, I wouldn't recommend cutting it down but you could. Just find a spring and if it has less tension swap it out and see if it works.

You can buy a "Mad Man Spring Kit" as well, just search for it in google or some other search engine.

As for the double trigger I'm going to agree with Henry VII, as long as you use the GTA double trigger you will be fine with the e-grip. The main problem, and rumor buzzing around, is that the double trigger doesn't work with the E-Grip, the GTA one does, the aftermarket (Psycho Ballistics, Dead On, etc) didn't work well (sometimes not at all) with the E-Grip. The aftermarket designs were slightly different than the GTA, so they didn't function properly.

You can look up the Straw/Q-Tip/Toothpick mod up too, that's to get your E-grip and other mechanical trigger, even shorter. Good luck.

[Bunker50]

I used one of those fancy doctor pen springs for my rear spring and i am not sure but i believe i used the rear spring and put it up on the front.(im 2 lazy 2 check) Anyway,i can fire A LOT faster with the new springs.I tried the qtip mod and it shortened the pull alot but the pull was very heavy sp i took it off. Hope this helps

[Natural Newbie]

Make sure you leave the sear spring stock or the sear will not return fast enough causing double fires and lots of chopped balls. Replacing the trigger spring with a pen spring is perfectly fine.

[Ares - II]

use ortho bands they work better and u dont have to trim them go buy them at walmart or something. And just rap some tape around the sear i think it is and ur good to go may take adjusting.

[Ohondareal]

so you said use ortho rubber bands..where do i put them and why wrap tape around the sear, and is the sear the metal thing on the trigger....haha

[Ares - II]

http://www.pbreview.com/forums/showthread.php?s=&threadid=71744&highlight=mod

go their im not gunna explain it that does