LAST REG QUESTION! I PROMISE

[Predator2]

I know i have been asking a lot of regulator questions such as which one is which and bla bla. Well here we go:

Tell me the regulator that works best w/ CO2 and Nitro. I should have asked that in the beginning.

[adVanCedSh0t]

PMI Energy REg is good. It works with both co2 and nitro. ITs not even that expensive its 42$. Im getting one for my piranha from what TL told me it works good. :)

[Cory]

i dissaggree the pure energy reg is a poor regulator. there is a lot of shoot down with it. i have a max flow reg on my shocker...but it freezes frequently with co2 in the winter, but works great with compressed air. for co2 get something a little higher than a pure energy reg if you plan on shooting fast. maybe a vigilanti or something like that.

[Skelo]

Where can you get a PMI Pure Energy regulator for 42$

[SmartBall]

Originally posted by Cory
maybe a vigilanti or something like that.

Vigilantes are meant for N2, they absolutly SUCK on Co2, unless you have a Co2000 reg on your tank, as a first reg. If you use a vigi with Co2, i highly reccomend using it as a secondary reg. Palmers female stabilizer with the bottom line setup is awsome! Plus the Stablizer only costs about $75, and it's the BEST if your using Co2.

Skelo-U can get a PMI reg for $43 at http://www.Paintballgear.com
under gas and regs.

[Predator2]

so which reg will be the best for both CO2 and nitro and not cost over 90 bucks.

[Emp]

WEll your kinda out of luck, some people just buy an anti-syphon kit for their C02 and use a n2 geared regulator. Also, if you Do decide to buy stabelizer, it will work pretty well on N2 also.

[Predator2]

will a nitro reg work well w/ an antisiphon tube in my CO2 tank?

[adVanCedSh0t]

http://www.shop4paintball.com
If that person still wants it.

[Skelo]

What about an Anti-Siphon kit? Where can I get one?

[TLplus84]

no do not get a N2 only reg, even with an Anti Siphon tube. The gas is still very cold, and it will still freeze up the O rings and cause you more trouble than you really need. the PMI Pure energy i used, i could not freeze it up no matter how hard i tried. It is a nice reg for the money, and it will work nicely with both Co2 and N2

[A damn fool]

The pmi reg works great, i used it with co2 in cold weather, and i didnt have ne problems with it. I dont know how it nitro, but i know it can be usedwihth it. Its a great, inexpensive reg that u can use for both setups

[Silent Knight]

from what i hear the PMI is ok for Co2 but it's not the best. The best is supposed to be the Palmer Stabalizer/Regulator. it's a reg that was designed for Co2 useage

[TLplus84]

it is, but if yo'ure gonna go Co2, and hten N2, you want to get a well rounded reg, like the PMI Pure Energy.

[Silent Knight]

oh yea, sorry! i didn't see that part of the post. I thought he was just asking for Co2! didn't see the Nitro part. My bad. please forgive this no good newbie! hehehe