Wicked bad consistancy

[jmtilton]

I'm getting like +/-10-15 on my b2k4 with 04 gladiator and sonic lpr. The regs are kinda new but should be pretty broken in by now, and they are both clean and schloopy. Whats the deal?

[F.O.D.]

1. Change battery
2. make sure the ram isn't gunked up, lube it a little
3. Use good paint, barrel match

[jmtilton]

Brand spankin new battery.
Ram is all cleaned and lubed
Barrel- Ultralite. Paint- Not all that good (Diablo Blaze)
I dont think its the paint though because my friend was getting +/- 3 with his stock lpr and centerflag reg on his b2k.

[paintballhead5]

sweet spot your HPR then set ur lpr.

[ShootPaint]

Usually inconsistancy is caused by your regs. A improper adjustment of them may yield proper field speeds but poor consistancy.

you might want to try turning your LPR up and your HPR down. This will yield a slightly long valve dwell and in turn will usually help with consistancy. If this doesnt help you might want to look at cleaning and lightly lubing your solenoid. They can get dry over time and cause problems as well. Last on the list of things to check out is your board settings. If you are running a aftermarket board make sure to adjust your dwell to at least 8ms. When setting up custom B2K's I have found that dwell settins below 8ms makes it very hard to get the marker consistant. Settings of 8-12ms usually makes it much easier to achieve a plus or minus 3-5FPS with all stock ICD parts.

Hope this helps.

[lotus_esprit5]

maybe its that f&!*ing angel-wannabe 90 degree grip frame on ur gun?

......

Naw man im just dicking around with u it looks sweet.

:)

listen to whatever shootpaint said. also it may be ur valve. I dont know anything about valves, wut they do, or how to fix them, but check it out anyway. If that doesn't work and ur gun is still having trouble staying consistent, feed it X-Lax and watch it's fiber intake.

just putting that out there. good luck!