help!

[dawgpound55]

i finally got all the parts i need to set up my timmy (macdev gladiator, pmi drop forward, pmi pure engery preset 88ci 4500psi and macoline kit). i put everthing together but ther doesnt seem to be any air traveling to the timmy. i have a lp and hp gauge on each of my regs, wouldnt the gauges move once i plug in the air tank? the marker wont even fire. it just looks the same whether i put my tank in or not. i dont think this is the case, but is there something i need to do on the lcd screen to get it going? there doesnt appear to be any leaks, so i dont know whats wrong.
help! :bawling:

[Omega6_Virus]

Did you turn it on?
Your air tank filled? If yes did the valve break and leak?
are all connections solid?
did you take things off and clean them?

[dawgpound55]

air tank is filled with no leaks
timmy is on
there is are a few small leaks in the macro line but very minor. wouldnt some air get thru though?
i havent cleaned it yet cuz it brand new. do i have to do that first? how would me not cleaning it not make the gun work right out of the box? thanks...

[Omega6_Virus]

I dunno about cleaning it, but check all connections. I dunno. Call bob. Hes your best bet.

[Vern1]

Do you have pressure reading on any gauges?
When the air is turned on, can you push the bolt forward?
If you can push the bolt forward or it stays forward when air is on, turn up the gladiator a little and see if the bolt moves back.
You will need about 180-200 out of reg for LP modded markers or 500 or so if you are using the stock top regulator on your marker.
Hope this helps.

[dawgpound55]

i have gauges on both the hp and lp regs, but once i gas up none of the gauges move.
yeah i can move the bolt back and forth. it seems like the air it traveling through the macroline (because i can hear a very small leak) but it doesnt seem to be going thru the regs and into the gun.:confused:

[SH4YD33]

did you unscrew the regs on the actual gun? because that seems like the case. get a alen key and screw in the regs on the front of the gun below the barrel. the top is the hp (should be around 280) and the bottom is the lp (should be 85) adjust to those settings. if this dosent help.. then you might need to call bob. also try turning up the pressure on your inline.